OPA727AIDRBRG4

$0.71

Description：IC OPAMP GP 1 CIRCUIT 8SON
Series：e-trim™
Mfr：Texas Instruments
Package：Tape & Reel (TR)

SKU:c69f9a709558 Category: Instrumentation, Op Amps, Buffer Amps Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

OPA727AIDRBRG4 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC OPAMP GP 1 CIRCUIT 8SON. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for OPA727AIDRBRG4

Description：IC OPAMP GP 1 CIRCUIT 8SON
Series：e-trim™
Mfr：Texas Instruments
Package：Tape & Reel (TR)
Amplifier Type：General Purpose
Number of Circuits：1
Output Type：Rail-to-Rail
Slew Rate：30V/µs
Gain Bandwidth Product：20 MHz
Current - Input Bias：85 pA
Voltage - Input Offset：15 µV
Current - Supply：4.3mA
Current - Output / Channel：40 mA
Voltage - Supply Span (Min)：4 V
Voltage - Supply Span (Max)：12 V
Operating Temperature：-40°C ~ 125°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-VDFN Exposed Pad
Supplier Device Package：8-SON (3x3)
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for OPA727AIDRBRG4

OPA727AIDRBRG4

Instrumentation, Op Amps, Buffer Amps Overview

The OPA727AIDRBRG4 is a dual-channel, high-precision CMOS operational amplifier from the e-trim family. It features a 20MHz gain-bandwidth product and a 30V/µs slew rate. The device offers an input offset voltage of 150µV maximum and drift of 1.5µV/°C maximum. Quiescent current is 4.3mA per channel with a supply range of 4V to 12V. It operates over a temperature range of -40°C to +125°C in an 8-pin DFN package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

e-trim technology provides digital trimming after packaging for low offset and drift
Rail-to-rail output capability maximizes dynamic range
Single-supply operation extends common-mode range to ground
Low noise density supports precision signal conditioning

Instrumentation, Op Amps, Buffer Amps Applications

Optical networking transimpedance amplifiers
High-performance audio circuits
Active filter designs
A/D converter drivers
Process control instrumentation

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'RG4' indicates RoHS compliance and lead-free status as defined by Texas Instruments standards. Confirm the 'DRB' designation matches the required DFN-8 package type for your layout. Ensure the 'A' grade corresponds to the specified offset voltage limits for your application requirements.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when high DC precision and wide bandwidth are required simultaneously. The e-trim process ensures stability against molding stresses. Consider the OPA728 if shutdown functionality is needed. Verify that the single-supply rail-to-rail output meets the dynamic range requirements of the downstream circuitry.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the OPAx727 series, which includes single (OPA727), dual (OPA2727), and quad (OPA4727) variants. All share the same core e-trim CMOS architecture. The OPA728 variant adds a shutdown pin. The family is designed for applications requiring both high speed and high precision.