OVETGLJANF-2.176000

Oscillators Overview

The Taitien OVETGLJANF-2.176000 is a standard crystal oscillator (XO) generating a 2.176 MHz output frequency with CMOS logic levels. It operates within a supply voltage range of 2.8V to 3.3V and features an enable/disable control function. The device exhibits a frequency stability of ±50ppm across the operating temperature range of -40°C to +85°C. Maximum supply current is 10mA, reducing to 10µA in disable mode. It utilizes a 4-SMD, no-lead surface-mount package measuring 5.00mm x 3.20mm x 1.30mm.

Oscillators Feature Summary

• CMOS output interface for digital logic compatibility
• Enable/disable functionality for power management
• Surface mount construction for automated assembly

Oscillators Applications

• Standard clock signal generation in embedded systems
• Timing reference for microcontrollers and processors
• Digital circuit synchronization in consumer electronics

Oscillators Procurement Notes

Verify the specific frequency suffix matches the required 2.176 MHz application. Confirm the CMOS output type aligns with target logic families. Ensure the 4-SMD package dimensions fit the PCB footprint. Check RoHS compliance status if environmental regulations apply. Validate the enable pin configuration against system design requirements.

Oscillators Selection Notes

Select this component when a precise 2.176 MHz timing source is required for low-power digital applications. The CMOS output suits direct interfacing with standard logic gates without additional buffering. The enable feature allows dynamic power reduction during idle states. Consider the ±50ppm stability sufficient for most general-purpose communication protocols.

Oscillators Part Context

This part belongs to the Taitien OV series of surface-mount crystal oscillators. The series offers various frequencies and packages tailored for compact electronic designs. The OVETGLJANF variant specifically denotes the CMOS output and enable capability within the standard XO category.

Oscillators Replacement Considerations

Direct substitutes must match the 2.176 MHz frequency, CMOS output, and 4-SMD package. Verify equivalent electrical parameters including voltage range and current consumption. Cross-reference manufacturer datasheets for pinout compatibility.