OWMO-6027TA-34-RC101

Microphones Overview

The OWMO-6027TA-34-RC101 is an analog electret condenser microphone manufactured by Ole Wolff Electronics Inc. It features an omnidirectional polar pattern and utilizes solder terminals for circuit integration. The device operates within a voltage range of 1 V to 10 V. Its frequency response spans from 50 Hz to 8 kHz, providing suitable audio capture for general voice applications. The sensitivity is specified at -34dB ±3dB relative to 94dB SPL.

Microphones Feature Summary

• Omnidirectional acoustic pickup pattern
• Electret condenser transducer technology
• Solder terminal mounting interface

Microphones Applications

• Voice recognition systems
• Consumer electronic audio input
• General purpose sound detection

Microphones Procurement Notes

Verify the specific manufacturer part number against official Ole Wolff Electronics Inc documentation to ensure compatibility with design requirements. Confirm that the solder terminal configuration matches the target PCB layout. Check RoHS compliance status if required by regional regulations. Ensure operating voltage constraints align with the system power supply.

Microphones Selection Notes

Select this component when an omnidirectional electret microphone with solder termination is required. The 50 Hz to 8 kHz frequency range suits voice-centric applications rather than high-fidelity music recording. Verify that the -34dB sensitivity meets the signal-to-noise ratio needs of the downstream amplifier stage. Ensure the 1 V to 10 V bias voltage is supported by the host circuit.

Microphones Part Context

This model belongs to the Ole Wolff Electronics Inc microphone portfolio, specifically designed as an electret condenser microphone (ECM). It is categorized under analog microphones intended for direct integration into electronic circuits via solder pads. The product line emphasizes standard form factors for widespread consumer electronics adoption.

Microphones Replacement Considerations

No public substitute part numbers are confirmed in available documentation. Cross-referencing requires matching electrical parameters including sensitivity, voltage range, and frequency response. Physical package dimensions and terminal type must also be verified before substitution.