PC3SD12NXZA

$0.40

Description：OPTOISOLATOR 5KV TRIAC 1CH 6-SMD
Series：-
Mfr：Sharp Microelectronics
Package：Tube

SKU:851c8edafae6 Category: Triac, SCR Output Optoisolators Brand: Sharp Microelectronics

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

PC3SD12NXZA is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists Sharp Microelectronics. Its product description is OPTOISOLATOR 5KV TRIAC 1CH 6-SMD. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for PC3SD12NXZA

Description：OPTOISOLATOR 5KV TRIAC 1CH 6-SMD
Series：-
Mfr：Sharp Microelectronics
Package：Tube
Output Type：Triac
Zero Crossing Circuit：No
Number of Channels：1
Voltage - Isolation：5000Vrms
Voltage - Off State：600 V
Static dV/dt (Min)：1kV/µs
Current - LED Trigger (Ift) (Max)：10mA
Current - On State (It (RMS)) (Max)：100 mA
Current - Hold (Ih)：3.5mA
Turn On Time：50µs (Max)
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Operating Temperature：-30°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：6-SMD
Supplier Device Package：6-SMD
Approval Agency：CSA, UR

Triac, SCR Output Optoisolators datasheet and documents for PC3SD12NXZA

PC3SD12NXZA

Triac, SCR Output Optoisolators Overview

The PC3SD12NXZA is a single-channel optoisolator manufactured by Sharp Microelectronics, featuring a PhotoTriac output. It provides an isolation voltage of 5000 Vrms and supports a peak repetitive off-state voltage of 600 V. The device operates within a temperature range of -30°C to 100°C. Key electrical parameters include a maximum forward current of 50 mA, a typical forward voltage of 1.2 V, and a maximum trigger current of 10 mA. It offers a static dv/dt rating of 1 kV/µs and a maximum on-time of 50 µs.

Triac, SCR Output Optoisolators Feature Summary

Integrates a PhotoTriac output for AC load switching applications
Provides high-voltage isolation capability rated at 5000 Vrms
Designed for surface-mount installation in compact electronic circuits

Triac, SCR Output Optoisolators Applications

Solid-state relay (SSR) driver circuits
AC power control systems
Industrial automation interfaces

Triac, SCR Output Optoisolators Procurement Notes

Verify the specific suffix 'NXZA' against the official datasheet to confirm package type and tape/reel specifications. Confirm RoHS compliance status as historical Sharp documentation may vary. Ensure the component meets the required isolation voltage ratings for the target application safety standards before procurement.

Triac, SCR Output Optoisolators Selection Notes

Select this component when a surface-mount triac output isolator is required for AC switching. Compare the 600 V blocking voltage and 100 mA holding current against load requirements. Consider the 50 µs turn-on time for timing-sensitive applications. Verify that the 6-SMD package fits the PCB layout constraints.

Triac, SCR Output Optoisolators Part Context

This part belongs to the Sharp PC3SD series of triac output optocouplers. The series is designed for general-purpose AC switching. The NXZA suffix typically denotes a specific surface-mount packaging configuration distinct from the through-hole DIP variants found in the same product family.