PCA82C250T/YM,118

Drivers, Receivers, Transceivers Overview

The PCA82C250T/YM,118 is a CAN controller interface manufactured by NXP Semiconductors. It serves as the link between a CAN protocol controller and the physical bus, providing differential transmit and receive capabilities. The device supports high-speed operation up to 1 MBd and complies with the ISO 11898 standard. Key electrical parameters include a supply voltage range of 4.5 V to 5.5 V, an operating temperature range from -40 °C to +125 °C, and a maximum propagation delay of 50 ns in high-speed mode. It features short-circuit protection to battery and ground, thermal protection, and low-current standby functionality.

Drivers, Receivers, Transceivers Feature Summary

• Fully compatible with the ISO 11898 standard for high-speed automotive applications
• Bus lines protected against transients in an automotive environment
• Slope control capability to reduce Radio Frequency Interference (RFI)
• Differential receiver with wide common-mode range for high immunity against ElectroMagnetic Interference (EMI)

Drivers, Receivers, Transceivers Applications

• High-speed automotive applications requiring up to 1 MBd transmission speed

Drivers, Receivers, Transceivers Procurement Notes

Verify the specific ordering suffix YM,118 corresponds to the SO8 plastic small outline package (SOT96-1) with reel pack SMD orientation. Confirm RoHS compliance status and check for any discontinuation notices or alternative part numbers if sourcing through distributors. Ensure the component matches the exact revision level required for your design specifications.

Drivers, Receivers, Transceivers Selection Notes

Select this component when designing interfaces for high-speed CAN networks up to 1 MBd. Consider the Rs pin configuration for slope control or standby modes based on RFI requirements and power consumption needs. Ensure the PCB layout accommodates the SO8 package dimensions and provides adequate thermal dissipation given the junction-to-ambient thermal resistance characteristics.

Drivers, Receivers, Transceivers Part Context

This part belongs to the PCA82C250 series of CAN transceivers designed for robust communication in electrically noisy environments. It bridges microcontrollers or CAN controllers with the physical CAN bus lines. The YM,118 suffix indicates a specific tape and reel packaging format suitable for automated surface-mount assembly processes.

Drivers, Receivers, Transceivers Replacement Considerations

Check for direct cross-references within the NXP portfolio such as the TJA1040 or TJA1041, which offer similar high-speed CAN transceiver functionalities. Verify pin compatibility and electrical parameter alignment before substituting.