PD0560-8-SF

RF Power Dividers/Splitters Overview

The PD0560-8-SF is an RF power divider and combiner module manufactured by Withwave Co Ltd. It operates within a frequency range of 500 MHz to 6 GHz and features SMA connectors. The component provides eight output ports with a maximum VSWR of 1.5 and minimum isolation of 18 dB. Key electrical specifications include an insertion loss of 11.8 dB, an amplitude imbalance of 5 degrees, and a maximum input power handling capability of 25 Watts. The device maintains a characteristic impedance of 50 Ohms.

RF Power Dividers/Splitters Feature Summary

• Provides signal division and combination across a wide RF bandwidth from 500 MHz to 6 GHz
• Supports high power handling up to 25 Watts for robust operational performance
• Ensures signal integrity through low voltage standing wave ratio and high port-to-port isolation

RF Power Dividers/Splitters Applications

• Wireless communication systems requiring multi-channel signal distribution
• Test and instrumentation equipment for RF signal analysis
• Automated test equipment setups needing precise power splitting

RF Power Dividers/Splitters Procurement Notes

Verify the specific datasheet version against the manufacturer's official documentation to confirm current electrical tolerances and connector specifications. Ensure that the SMA interface compatibility matches the system requirements. Cross-reference the part number PD0560-8-SF directly with Withwave Co Ltd to validate authenticity and technical compliance before integration into hardware designs.

RF Power Dividers/Splitters Selection Notes

Select this component when an eight-way split is required within the 500 MHz to 6 GHz spectrum. Consider the 25 Watt power rating for applications involving higher signal levels. Evaluate the 11.8 dB insertion loss impact on system gain budgets. Compare against lower-port-count variants if fewer outputs are sufficient for the specific design constraints.

RF Power Dividers/Splitters Part Context

This model belongs to the PD0560 series of power dividers and combiners produced by Withwave Co Ltd. The series targets wireless communications, test instrumentation, and automated testing markets. The PD0560-8-SF represents the eight-output configuration variant, distinct from four-port models like the PD0560-4-SF, offering expanded channel distribution capabilities while maintaining consistent impedance and connector standards.

RF Power Dividers/Splitters Replacement Considerations

The PD0560-4-SF serves as a related variant within the same product family but offers only four output ports instead of eight. Both share similar frequency ranges and connector types. Verify port count requirements carefully when substituting, as the electrical characteristics such as insertion loss and power handling may differ between the two configurations.