PE-0805CCMC670STH

Common Mode Chokes Overview

The PE-0805CCMC670STH is a surface-mount common mode choke from Pulse Electronics' ChipChoke CCMC series. It features a low-profile horizontal design with four pad termination. Key electrical specifications include an impedance of 67 Ohms at 100 MHz, a maximum DC resistance (DCR) of 250 milliohms, and a current rating of 400 mA. The device supports a DC voltage rating of 50V and measures 2.20mm in length by 1.30mm in width.

Common Mode Chokes Feature Summary

• Low profile construction optimized for space-constrained wireless charging applications
• Horizontal package configuration with four-pad surface mount termination
• Designed for effective common mode noise suppression in signal lines

Common Mode Chokes Applications

• Wireless charging circuits
• Signal line filtering
• Common mode noise suppression

Common Mode Chokes Procurement Notes

Verify the specific suffix against official documentation to confirm exact physical dimensions and tolerance levels. Ensure compatibility with automated pick-and-place equipment due to the horizontal package style. Confirm that the 400mA current rating meets the operational requirements of the target circuit without saturation.

Common Mode Chokes Selection Notes

Select this component when a compact, low-inductance solution is required for high-frequency noise attenuation. The 67 Ohm impedance at 100 MHz targets specific interference bands. Consider the 250 milliohm DCR limit for power efficiency constraints in low-voltage signal paths.

Common Mode Chokes Part Context

This part belongs to the ChipChoke CCMC series, which focuses on providing reliable EMI filtering in minimal footprints. The CCMC line is engineered for modern electronics where board real estate is limited, offering standardized performance metrics for common mode chokes in consumer and industrial devices.

Common Mode Chokes Replacement Considerations

Check for direct substitutes within the same CCMC series or other low-profile 0805-style chokes. Verify that alternative parts match the 67 Ohm impedance at 100 MHz and the 400mA current handling capability to ensure functional equivalence.