PE-T1012

RF Power Dividers/Splitters Overview

The PE-T1012 is a Pasternack RF power divider designed as a 3-way N-type equal-tapper. It operates within a frequency range of 600 MHz to 2.7 GHz and features a 50 Ohm impedance system. The component is engineered for high-power applications, with official documentation citing ratings of either 300 Watts or 500 Watts depending on the specific datasheet version. It is optimized for mobile network infrastructure and incorporates low PIM characteristics to ensure signal integrity in demanding environments.

RF Power Dividers/Splitters Feature Summary

• Provides equal power division across three output ports using an N-type connector interface
• Engineered for low passive intermodulation (PIM) performance to maintain signal quality
• Optimized specifically for integration into mobile network base station architectures

RF Power Dividers/Splitters Applications

• Mobile network base station distribution systems
• RF signal splitting in telecommunications infrastructure
• Low PIM compliant antenna feed networks

RF Power Dividers/Splitters Procurement Notes

Verify the specific power rating required for your application, as documentation references both 300W and 500W specifications for this part number. Confirm that the N-type connector gender matches your existing cabling infrastructure. Ensure the operating frequency range fully encompasses your system's bandwidth requirements before finalizing procurement decisions.

RF Power Dividers/Splitters Selection Notes

Select the PE-T1012 when a three-way split is required for N-type interfaces in mobile network deployments. Consider the PE-T1010 if a four-way split is needed instead. Evaluate the PE-T1004 if a lower frequency range down to 376 MHz is necessary. Choose this model over 7/16 DIN variants if N-type compatibility is mandatory for your system design.

RF Power Dividers/Splitters Part Context

This component belongs to Pasternack’s Tapper series of RF power dividers. These devices are distinct from standard splitters by their specific optimization for mobile network environments. The series includes various configurations such as two-way, three-way, and four-way splits with different connector types like N-type and 7/16 DIN.

RF Power Dividers/Splitters Replacement Considerations

The PE-T1010 serves as a similar alternative offering a 4-way split configuration. For 2-way splitting needs, the PE-T1003 provides a comparable N-type solution. Cross-reference these models if the exact 3-way topology does not fit the system architecture.