PE2000

RF Power Dividers/Splitters Overview

The Pasternack PE2000 is a two-way reactive power divider designed for RF signal distribution within the 2 MHz to 500 MHz frequency range. It features BNC female connectors and is rated for 1 Watt of power handling capacity. Key electrical specifications include a minimum isolation of 25 dB, a maximum insertion loss imbalance of 2 degrees, and a maximum VSWR of 1.35. The unit measures 1.752 inches in length, 1.669 inches in width, and 0.949 inches in height.

RF Power Dividers/Splitters Feature Summary

• Provides equal power splitting between two output ports using a reactive circuit topology.
• Ensures signal integrity with high isolation levels between output channels.
• Maintains low voltage standing wave ratio for efficient power transfer across the operating band.

RF Power Dividers/Splitters Applications

• RF test and measurement setups requiring signal distribution
• Antenna array feed networks
• Communication system signal monitoring

RF Power Dividers/Splitters Procurement Notes

Verify that the required frequency range aligns with the 2 MHz to 500 MHz specification. Confirm that the 1 Watt power rating meets the system's peak power requirements. Ensure connector compatibility by checking for BNC female interfaces on both input and output ports. Review mechanical dimensions to confirm fit within the intended enclosure or rack space.

RF Power Dividers/Splitters Selection Notes

Select this component when a broadband power split is needed below 500 MHz. Consider the 25 dB isolation limit for applications requiring moderate port-to-port separation. Evaluate the physical size constraints against the 1.752-inch length dimension. Compare performance needs against higher-frequency alternatives if operation above 500 MHz is anticipated.

RF Power Dividers/Splitters Part Context

This device belongs to the category of RF power dividers and splitters manufactured by Pasternack. It serves as a passive component for dividing input signals into two paths. The product line focuses on microwave and RF interconnect solutions, providing standardized interfaces for laboratory and industrial electronics.

RF Power Dividers/Splitters Replacement Considerations

No public confirmed substitute part numbers are available in the provided documentation.