PE2038

$312.56

Description：50 Ohm 4 Way N Power Divider Fro
Series：-
Mfr：Pasternack
Package：Retail Package

SKU:2812f635cec8 Category: RF Power Dividers/Splitters Brand: Pasternack

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

PE2038 is listed in the RF Power Dividers/Splitters range at ChipApex. The manufacturer field lists Pasternack. Its product description is 50 Ohm 4 Way N Power Divider Fro. Review the specifications below when checking this part for your BOM.

RF Power Dividers/Splitters specifications for PE2038

Description：50 Ohm 4 Way N Power Divider Fro
Series：-
Mfr：Pasternack
Package：Retail Package
Insertion Loss：2.25dB
Frequency：500 MHz ~ 1 GHz
Specifications：Isolation (Min) 20dB, 2° Imbalance (Max), 1.5 VSWR (Max)
Size / Dimension：4.000" L x 3.000" W x 0.930" H (101.60mm x 76.20mm x 23.62mm)
Package / Case：Module

RF Power Dividers/Splitters datasheet and documents for PE2038

PE2038

RF Power Dividers/Splitters Overview

The PE2038 is a 50 Ohm four-way N-type female power divider manufactured by Pasternack. It operates within a frequency range of 500 MHz to 1 GHz and is rated for 10 Watts of power handling capacity. Key electrical specifications include a maximum insertion loss of 2.25 dB, minimum isolation of 20 dB, maximum imbalance of 2 degrees, and a maximum VSWR of 1.5. The device is housed in a module package with dimensions of 4.000 inches in length, 3.000 inches in width, and 0.930 inches in height.

RF Power Dividers/Splitters Feature Summary

Four-way signal splitting capability using N-type female connectors
Designed for operation between 500 MHz and 1 GHz
Rated for 10 Watts power handling

RF Power Dividers/Splitters Applications

RF signal distribution networks
Antenna array feeding systems
Test and measurement setups requiring signal splitting

RF Power Dividers/Splitters Procurement Notes

Verify the specific connector gender and interface type against project requirements before ordering. Confirm that the operating frequency range aligns with system specifications. Ensure the power rating meets the application demands. Check for any required accessories or mounting hardware not included in the standard package.

RF Power Dividers/Splitters Selection Notes

Select this component when a four-way split is required within the 500 MHz to 1 GHz band. Consider the physical dimensions for enclosure space. Evaluate the insertion loss and isolation parameters against system budget requirements. Ensure compatibility with existing N-type connector infrastructure.

RF Power Dividers/Splitters Part Context

This part belongs to the RF power divider category from Pasternack. It serves as a passive signal conditioning component used to divide input power equally among four output ports. The design focuses on maintaining impedance matching and signal integrity across the specified frequency range.