PE2062

RF Power Dividers/Splitters Overview

The Pasternack PE2062 is a 75 Ohm, 2-way BNC power divider designed for signal conditioning applications. It operates within a frequency range of 10 MHz to 1,000 MHz and is rated for 1 Watt of power handling. Key electrical specifications include a minimum isolation of 20 dB, a maximum VSWR of 1.5, and an output imbalance of 2 degrees. The unit features BNC female connectors on all ports. Physical dimensions are 44.40mm in length, 42.40mm in width, and 24.11mm in height.

RF Power Dividers/Splitters Feature Summary

• Provides equal power splitting between two output ports from a single input
• Maintains 75 Ohm impedance matching across the operational bandwidth
• Ensures signal integrity through specified isolation and low VSWR performance

RF Power Dividers/Splitters Applications

• RF signal distribution in broadcast systems
• Video signal routing in professional AV infrastructure
• Test and measurement setups requiring signal splitting

RF Power Dividers/Splitters Procurement Notes

Verify that the required impedance is 75 Ohms, as this component is specific to video and broadcast standards rather than standard 50 Ohm RF systems. Confirm connector type compatibility with existing BNC cabling. Ensure the operating frequency range covers the entire spectrum of the intended application, specifically checking against the 1 GHz upper limit. Validate power requirements do not exceed the 1 Watt rating to prevent damage.

RF Power Dividers/Splitters Selection Notes

Select the PE2062 when a 75 Ohm system requires splitting a signal into two equal paths without significant loss or reflection. This component is suitable for frequencies up to 1 GHz where moderate isolation is sufficient. Consider physical size constraints given its compact housing. Compare against other Pasternack models if different connector types or frequency ranges are needed.

RF Power Dividers/Splitters Part Context

This part belongs to the Pasternack 2 Way Power Dividers Series, which focuses on signal conditioning components. These devices are engineered to divide RF energy evenly while maintaining system impedance. The series supports various connector types and frequency ranges, catering to diverse communication and broadcasting needs.

RF Power Dividers/Splitters Replacement Considerations

Check for exact model number matches to ensure identical electrical characteristics. Verify that any substitute maintains the 75 Ohm impedance and BNC interface. Confirm frequency range and power handling capabilities align with original specifications.