PE2080

RF Power Dividers/Splitters Overview

The PE2080 is a 50 Ohm two-way SMA power divider manufactured by Pasternack. It operates within a frequency range of 4 GHz to 8 GHz and is rated for an input power of 10 Watts. Key electrical specifications include a maximum insertion loss of 0.35 dB, a minimum isolation of 20 dB, and a maximum VSWR of 1.3. The component utilizes SMA connectors for signal interfacing.

RF Power Dividers/Splitters Feature Summary

• Provides equal power splitting between two output ports
• Maintains consistent 50 Ohm impedance across the operating band
• Ensures high port-to-port isolation to minimize signal interference

RF Power Dividers/Splitters Applications

• RF signal distribution in wireless communication systems
• Test and measurement setups requiring precise power division
• Balanced amplifier drive networks

RF Power Dividers/Splitters Procurement Notes

Verify the specific datasheet version to confirm connector gender and pin configuration. Ensure the application environment remains within the specified 10 Watt power rating and 4-8 GHz frequency limits. Check for any updated compliance certifications or material composition changes prior to final procurement approval.

RF Power Dividers/Splitters Selection Notes

Select this component when a compact, fixed-ratio split is required for frequencies above 4 GHz. Consider the SMA interface compatibility with existing system cabling. Evaluate if the 0.35 dB insertion loss meets the system budget compared to alternative splitter technologies.

RF Power Dividers/Splitters Part Context

This part belongs to Pasternack's line of RF power dividers and splitters. It serves as a passive component for dividing microwave signals into two paths. The design focuses on maintaining signal integrity and phase balance within the specified UHF and SHF bands.

RF Power Dividers/Splitters Replacement Considerations

Cross-reference with PE2081 for similar performance characteristics. Verify that substitute parts maintain the same SMA connector type and 50 Ohm impedance to ensure mechanical and electrical compatibility.