PE2088

RF Power Dividers/Splitters Overview

The Pasternack PE2088 is a 50 Ohm, two-way SMA Wilkinson power divider designed for signal conditioning applications. It operates within a frequency range of 690 MHz to 2.7 GHz and is rated for 10 Watts of power handling. Key electrical specifications include a maximum VSWR of 1.25, a minimum isolation of 22 dB, and a maximum imbalance of 3 degrees. The insertion loss is specified at 0.5 dB. The component features SMA connectors and is housed in a module package with dimensions of 2.000 inches in length, 1.969 inches in width, and 0.772 inches in height.

RF Power Dividers/Splitters Feature Summary

• Wilkinson topology ensures high port-to-port isolation
• SMA connector interface for standard RF integration
• Capable of handling up to 10 Watts of power

RF Power Dividers/Splitters Applications

• RF signal distribution networks
• Test and measurement instrumentation
• Wireless communication systems

RF Power Dividers/Splitters Procurement Notes

Verify the specific revision number (e.g., REV 1.0) against project requirements, as datasheet revisions may occur. Confirm that the SMA connector gender and cable assembly options, if applicable, match the system design. Ensure the operating environment remains within the specified temperature and power ratings to maintain performance integrity.

RF Power Dividers/Splitters Selection Notes

Select this component when a balanced split with high isolation is required between 690 MHz and 2.7 GHz. The 50 Ohm impedance matches standard RF systems. Consider the physical dimensions for enclosure space. The 10 Watt rating suits moderate power levels, while the low VSWR ensures efficient power transfer.

RF Power Dividers/Splitters Part Context

This part belongs to the Pasternack RF Power Dividers/Splitters category. It is a passive signal conditioning device used to divide input signals into two equal output paths. The Wilkinson design is preferred for its ability to isolate outputs from each other, preventing interaction between downstream stages.

RF Power Dividers/Splitters Replacement Considerations

No public confirmed substitute part numbers are available in the provided documentation. Cross-referencing requires matching frequency range, power rating, isolation, and connector type.