PE20DV006

RF Power Dividers/Splitters Overview

The PE20DV006 is a four-way SMA power divider manufactured by Pasternack, designed for signal conditioning applications within the 2 GHz to 18 GHz frequency range. The component is rated for a maximum power handling capacity of 30 Watts. Key electrical specifications include a maximum insertion loss of 8.2 dB at the center frequency and a minimum isolation of 16 dB between output ports across the operational bandwidth. The device maintains an imbalance of 10 degrees maximum and supports a voltage standing wave ratio (VSWR) of up to 1.65 maximum.

RF Power Dividers/Splitters Feature Summary

• Four-way signal distribution capability using SMA connectors
• Operational frequency coverage from 2 GHz to 18 GHz
• High power rating of 30 Watts for robust performance
• Maintains specified isolation and VSWR limits across the band

RF Power Dividers/Splitters Applications

• RF signal distribution in test and measurement equipment
• Multi-channel antenna feed networks
• Signal splitting for radar systems
• Communication system infrastructure components

RF Power Dividers/Splitters Procurement Notes

Verify the specific SMA connector gender and cable length requirements against the application schematic before ordering. Confirm that the 30-watt power rating aligns with the peak and average power levels present in the target RF chain. Ensure the operating frequency range fully encompasses the required signal spectrum without exceeding the 18 GHz upper limit. Check for any specific environmental ratings if the deployment involves extreme temperatures or humidity.

RF Power Dividers/Splitters Selection Notes

Select this component when a four-way split is required over a wide bandwidth extending to 18 GHz. Consider the 8.2 dB insertion loss impact on system gain budget compared to lower-frequency alternatives. Evaluate the physical size constraints relative to the 2.618-inch length dimension. Compare isolation performance against other models like the PE20DV001 if the application operates below 8 GHz and requires tighter isolation specs.

RF Power Dividers/Splitters Part Context

This part belongs to Pasternack's series of coaxial power dividers and splitters. It complements other models such as the PE2026, which offers a two-way split with a narrower 2-8 GHz range. The PE20DV006 provides higher channel count and broader bandwidth, distinguishing it from standard two-way dividers while maintaining compatibility with common SMA interfaces used in RF testing environments.

RF Power Dividers/Splitters Replacement Considerations

The PE20DV001 serves as a potential substitute for applications restricted to the 2-8 GHz range, offering improved isolation of 18 dB and lower insertion loss of 6.1 dB. However, it does not support frequencies above 8 GHz. No direct four-way replacement with identical 2-18 GHz coverage is listed in available documentation.