PE20DV1061

RF Power Dividers/Splitters Overview

The PE20DV1061 is a signal conditioning component classified as a power divider within the RF and microwave spectrum. It operates with a frequency range spanning from 6 GHz to 40 GHz. The device features a two-way split configuration, dividing input power equally between two output ports. It utilizes 2.92mm coaxial connectors for interface connectivity. The unit is rated for a maximum power handling capacity of 20 Watts. The impedance is standardized at 50 Ohms to ensure compatibility with standard RF systems.

RF Power Dividers/Splitters Feature Summary

• Provides equal power division across a wide high-frequency bandwidth
• Utilizes precision 2.92mm connector interfaces for reliable signal integrity
• Engineered for robust performance in demanding RF environments

RF Power Dividers/Splitters Applications

• RF test and measurement instrumentation
• Wireless communication system signal distribution
• Microwave circuit design and prototyping

RF Power Dividers/Splitters Procurement Notes

Verify that the required frequency range aligns with the 6 GHz to 40 GHz specification before ordering. Confirm that the 2.92mm connector type matches your existing cable assembly infrastructure. Ensure the system power levels do not exceed the 20 Watt rating to prevent component damage. Check for any specific environmental operating temperature requirements if used in extreme conditions.

RF Power Dividers/Splitters Selection Notes

Select this component when a two-way split is required for frequencies up to 40 GHz. Consider the 2.92mm connector size for space-constrained applications compared to larger SMA or N-type alternatives. Evaluate the 20 Watt power rating against peak and average signal levels in the target application. Compare insertion loss specifications if multiple dividers are cascaded in the signal chain.

RF Power Dividers/Splitters Part Context

This part belongs to Pasternack's portfolio of passive RF components designed for signal conditioning. Power dividers are essential for distributing signals to multiple paths without significant reflection. The 2.92mm interface indicates suitability for higher frequency operations where smaller connector sizes reduce parasitic effects. This component supports the broader category of microwave splitters used in modern electronic systems.

RF Power Dividers/Splitters Replacement Considerations

Direct substitutes may include other 2-way power dividers with identical 2.92mm interfaces and similar frequency ranges. Verify that alternative parts maintain the same 50 Ohm impedance and 20 Watt power handling capabilities. Ensure mechanical dimensions and mounting styles are compatible with the existing assembly to avoid redesign efforts.