PE20DV1063

RF Power Dividers/Splitters Overview

The PE20DV1063 is a two-way SMA power divider manufactured by Pasternack Enterprises, Inc. It operates within a frequency range of 15 GHz to 26.5 GHz and is rated for 20 watts of power handling capacity. Key electrical specifications include a maximum insertion loss of 0.8 dB, a minimum isolation of 16 dB with a phase imbalance of 5 degrees, a maximum VSWR of 1.5, and a maximum amplitude imbalance. The component utilizes SMA connectors and is designed for signal conditioning applications in high-frequency RF systems.

RF Power Dividers/Splitters Feature Summary

• Provides equal power splitting between two output ports using a coaxial design
• Maintains signal integrity through specified phase and amplitude balance metrics
• Supports high-power transmission up to 20 watts within the designated frequency band

RF Power Dividers/Splitters Applications

• RF signal distribution networks requiring precise power division
• High-frequency test and measurement instrumentation setups
• Wireless communication system components operating above 15 GHz

RF Power Dividers/Splitters Procurement Notes

Verify that the required power rating of 20 watts aligns with your system's operational limits. Confirm that the SMA connector interface matches your existing cabling infrastructure. Ensure the frequency range of 15 GHz to 26.5 GHz covers your specific application needs. Check datasheet specifications for isolation and VSWR requirements to guarantee signal quality.

RF Power Dividers/Splitters Selection Notes

Select this component when a two-way split is required at frequencies starting from 15 GHz. Consider the 0.8 dB insertion loss impact on overall system gain. Evaluate the 16 dB isolation specification for potential interference concerns. Compare the SMA connector type against other available interfaces like 2.92mm if space constraints exist.

RF Power Dividers/Splitters Part Context

This part belongs to Pasternack's series of RF power dividers and splitters. It is distinct from similar models such as the PE20DV1062, which uses 2.92mm connectors instead of SMA. The product line focuses on signal conditioning components for microwave and millimeter-wave applications, offering various split configurations and connector types.

RF Power Dividers/Splitters Replacement Considerations

Direct substitutes may include other two-way SMA power dividers from Pasternack with compatible frequency ranges. Verify connector compatibility and power ratings before swapping. No alternative part numbers are explicitly confirmed as direct replacements in the provided documentation.