PE2409-I-2300602

Power Transformers Overview

The PE2409-I-2300602 is a laminated core power transformer manufactured by PowerUC Electronics, designed for printed circuit board (PCB) mounting. It features a primary voltage of 230V and a secondary output of 6V. The unit has a rated power capacity of 0.5VA and operates at a frequency of 50Hz. Electrical isolation between the primary and secondary windings is rated at 3.75kV for one minute with a leakage current limit of 5mA. The device supports an operating temperature range from -30°C to +70°C and maintains a temperature rise of no more than 12°C under load.

Power Transformers Feature Summary

• Provides electrical isolation between input and output sides for safety applications
• Utilizes a laminated EI core structure for efficient magnetic flux coupling
• Designed for direct PCB pin mounting to facilitate compact assembly

Power Transformers Applications

• Power supply units requiring safe electrical isolation
• Electronic equipment needing step-down voltage conversion
• Control circuits utilizing low voltage secondary outputs

Power Transformers Procurement Notes

Verify the specific secondary voltage rating matches the target application requirements before procurement. Confirm that the physical dimensions and pin spacing are compatible with the intended PCB layout. Ensure the thermal management design accounts for the specified temperature rise limits during continuous operation to maintain reliability and safety compliance.

Power Transformers Selection Notes

Select this component when a small form factor transformer with high isolation voltage is required. The 0.5VA rating suits low-power control circuits rather than high-current loads. Consider the 50Hz frequency specification to ensure compatibility with the system's input power source. Verify that the 6V secondary output aligns with the downstream circuitry needs.

Power Transformers Part Context

This model belongs to the PE series of PCB safety isolation transformers from PowerUC Electronics. These components are engineered to provide reliable galvanic isolation in compact electronic assemblies. The series typically utilizes EI lamination cores to balance performance with size constraints, serving as a fundamental building block for isolated power delivery in various industrial and consumer electronics.

Power Transformers Replacement Considerations

Cross-reference the PE2409-I-2302401 if a 24V secondary output is acceptable instead of 6V. Verify that any substitute part maintains the same 3.75kV isolation rating and 0.5VA power capacity. Ensure the replacement component fits the existing PCB footprint and pin configuration without modification.