PIMP31PAS-QX

Overview

The PIMP31PAS-Q is a PNP/PNP Resistor-Equipped double Transistor (RET) housed in a DFN2020D-6 (SOT1118D) leadless SMD plastic package with side-wettable flanks. It features built-in bias resistors R1 = 1 kΩ and R2 = 10 kΩ, providing a ratio of 10. The device supports a collector-emitter voltage (VCEO) of -50 V and an output current (IO) of -500 mA per transistor. Key electrical characteristics include a DC current gain (hFE) of 70 at IC = -50 mA, a transition frequency (fT) of 150 MHz, and a collector-emitter saturation voltage (VCEsat) of -100 mV at IC = -50 mA. It is qualified according to AEC-Q101.

Feature Summary

• AEC-Q101 qualified for automotive applications
• Built-in bias resistors simplify circuit design
• Side-wettable flanks enhance solder joint visibility

Applications

• Digital applications
• Control of IC inputs
• Switching loads

Procurement Notes

Verify the specific ordering suffix against the manufacturer's official documentation to confirm packaging details such as reel or cut tape specifications. Confirm that the component meets the required AEC-Q101 qualification standards for your intended automotive application before finalizing procurement orders.

Selection Notes

Select this component when a dual PNP configuration with integrated biasing is required in a compact DFN2020D-6 footprint. Ensure the design accommodates the -50 V voltage rating and -500 mA current capability. Verify thermal dissipation requirements based on the specific PCB copper layer configuration and ambient temperature conditions.

Part Context

This part belongs to Nexperia's PIMP31PA family of resistor-equipped double transistors. The PIMP31PAS-Q variant specifically denotes automotive qualification under AEC-Q101 standards and utilizes the DFN2020D-6 package with side-wettable flanks, distinguishing it from standard commercial versions.

Replacement Considerations

Direct functional equivalents include the PIMN31PAS-Q (NPN/NPN) and PIMC31PAS-Q (NPN/PNP). For non-automotive replacements, verify if the standard PIMP31PA meets the mechanical and electrical requirements.