PLS-50F25AL01-04

Speakers Overview

The PLS-50F25AL01-04 is a full-range speaker manufactured by Peerless by Tymphany. It features a nominal diameter of 2 inches (57.00mm) and operates with a frequency response range of 150 Hz to 20 kHz. The unit has a nominal impedance of 4 ohms, with a measured DC resistance of approximately 4.42 ohms. It supports a maximum power handling capacity of 7 watts and delivers a sensitivity level of 81.6 dB. The physical height is 4.50 mm, and it utilizes solder pads for termination.

Speakers Feature Summary

• Full-range acoustic design covering mid-bass to high frequencies
• Top port configuration for optimized sound projection
• Compact seated height suitable for space-constrained enclosures

Speakers Applications

• Small enclosure audio systems
• Portable electronic devices requiring integrated speakers
• General purpose full-range sound reproduction

Speakers Procurement Notes

Verify the specific suffix codes against official Peerless by Tymphany documentation to ensure correct impedance and mounting specifications. Confirm RoHS compliance status through current manufacturer datasheets. Cross-reference part numbers with authorized distributors to avoid counterfeit components. Ensure solder pad compatibility with intended PCB assembly processes.

Speakers Selection Notes

Select this component when a compact 2-inch full-range driver is required. Consider the 4-ohm impedance for amplifier matching. Evaluate the 81.6 dB sensitivity against available drive levels. Check mechanical dimensions against enclosure constraints. Verify power handling requirements against operational signal levels.

Speakers Part Context

This model belongs to the PLS series from Peerless by Tymphany, focusing on compact audio solutions. The series typically offers full-range performance in small form factors. The PLS-50F25AL01-04 specifically targets applications needing balanced audio output within limited spatial boundaries.

Speakers Replacement Considerations

Consult official Peerless by Tymphany substitution guides for verified alternatives. Compare electrical parameters such as impedance and sensitivity before swapping. Mechanical fit must be validated for any potential replacement units.