PMO-6027P-40KDQ

Microphones Overview

The PMO-6027P-40KDQ is an omnidirectional analog microphone manufactured by Mallory Sonalert. It features a compact cylindrical form factor with a diameter of 6 mm and a depth of 2.7 mm. The component operates at a maximum voltage of 10 V and draws a rated current of 500 uA. It exhibits a sensitivity of -40 dB and presents an impedance of 2.2 kOhms. Electrical connections are established via solder pins, facilitating integration into printed circuit board assemblies.

Microphones Feature Summary

• Omnidirectional acoustic reception pattern for uniform sound capture from all directions
• Analog signal output suitable for direct interfacing with audio processing circuits
• Low power consumption profile optimized for battery-operated or energy-efficient applications

Microphones Applications

• Voice recognition systems requiring directional-independent input
• Consumer electronic devices with limited internal volume constraints
• Industrial control panels utilizing voice command interfaces

Microphones Procurement Notes

Verify the specific suffix configuration against official Mallory Sonalert documentation to ensure correct sensitivity and termination specifications. Confirm RoHS compliance status through the manufacturer's latest environmental declarations prior to finalizing procurement orders.

Microphones Selection Notes

Select this component when an omnidirectional response is required within a strict height limitation of 2.7 mm. Ensure the target application circuit can accommodate the specified 2.2 kOhm impedance and 500 uA current draw without additional amplification stages.

Microphones Part Context

This microphone belongs to the PMO series, which focuses on miniature audio transducers designed for space-constrained environments. The series emphasizes consistent performance across various industrial and consumer electronics platforms while maintaining standard electrical interface characteristics.

Microphones Replacement Considerations

Consult official substitution lists for verified equivalents. Cross-referencing requires matching the 6 mm diameter, 2.7 mm depth, and -40 dB sensitivity parameters to ensure functional compatibility.