PS9513L2-E3-AX

Logic Output Optoisolators Overview

The PS9513L2-E3-AX is a high-speed optocoupler manufactured by Renesas Electronics. It features a single channel with an open collector output configuration, designed for intelligent power module drive applications. The device provides 5000 Vrms isolation voltage and supports data rates up to 1 Mbps. Key electrical parameters include a forward current of 10 mA, a forward voltage of 1.65 V typical, and a reverse voltage rating of 5 V. The output can handle a maximum continuous current of 15 mA with a power dissipation of 100 mW. It operates within a temperature range of -40°C to +100°C and is available in an 8-pin DIP package.

Logic Output Optoisolators Feature Summary

• High common-mode rejection ratio for noise immunity
• Open collector output suitable for IPM driving
• Wide operating temperature range

Logic Output Optoisolators Applications

• Intelligent Power Module (IPM) drive circuits
• Industrial automation control systems
• Power supply feedback loops

Logic Output Optoisolators Procurement Notes

Verify the specific suffix E3-AX against the manufacturer's latest datasheet to confirm RoHS compliance and pinout compatibility. Ensure the DIP-8 package matches your PCB footprint requirements. Check for any recent Product Change Notifications (PCNs) that might affect material composition or manufacturing location. Confirm availability status as supply constraints may vary by region.

Logic Output Optoisolators Selection Notes

Select this component when high-speed signal isolation is required between low-voltage control logic and high-voltage power stages. The open collector output simplifies interface design with various logic families. Consider the 1 Mbps data rate limit for application timing requirements. The 5000 Vrms isolation rating ensures safety compliance in industrial environments. Verify thermal management needs given the 100 mW power dissipation limit.

Logic Output Optoisolators Part Context

This part belongs to the PS9513 series of high-speed optocouplers from Renesas. The series is characterized by its suitability for driving power modules like IGBTs and MOSFETs. The L2 variant specifically denotes the open collector output type. This family offers robust performance in electrically noisy environments common in motor control and power conversion applications.

Logic Output Optoisolators Replacement Considerations

Cross-reference with PS9513L2-V-E3-AX for similar specifications but verify output stage differences. Check PS9506L2-E3-AX if photo IC output is acceptable instead of open collector. Always validate pin-to-pin compatibility and electrical parameters before substitution.