PS9687L2-V-E3-A

Logic Output Optoisolators Overview

The CEL PS9687L2-V-E3-A is a high-speed logic output optoisolator featuring an open collector configuration. It supports a data rate of 10 Mbps and provides 5000 Vrms insulation voltage with a common-mode transient immunity (CMTI) of 10 kV/µs. The device utilizes an 8-DIP gull wing package designed for a creepage distance of 8 mm. It operates with DC input and includes a forward voltage specification of 1.65 V.

Logic Output Optoisolators Feature Summary

• High common-mode transient immunity for noise-resistant signal transmission
• Optimized physical layout for enhanced creepage distance requirements
• Open collector output architecture suitable for digital logic interfacing

Logic Output Optoisolators Applications

• Industrial communication bus isolation
• Microcontroller interface circuits requiring high speed
• Power supply feedback loops in switching regulators

Logic Output Optoisolators Procurement Notes

Verify the specific suffix E3 against official datasheets to confirm lead-free compliance status. Confirm that the 8-DIP gull wing package dimensions match your PCB footprint requirements. Ensure the 10 Mbps data rate meets your system timing constraints. Check for any updated lifecycle notices from the manufacturer regarding availability or obsolescence before finalizing procurement plans.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is required alongside robust noise immunity. The 10 kV/µs CMTI rating makes it suitable for environments with significant electrical noise. The open collector output allows for flexible voltage level shifting. Consider the 8 mm creepage distance if safety isolation standards are a primary design constraint.

Logic Output Optoisolators Part Context

This part belongs to the CEL PS9687 series of high-speed photocouplers. The series is characterized by its ability to handle rapid signal transitions while maintaining galvanic isolation. The L2 variant typically denotes specific packaging or pinout configurations within the broader product family, distinguishing it from standard DIP versions.

Logic Output Optoisolators Replacement Considerations

Direct substitutes may include other 10 Mbps open collector optocouplers with similar insulation ratings. Verify pin compatibility and package dimensions carefully. Cross-reference CMTI specifications to ensure equivalent noise performance in high-interference applications.