R573J23610

Overview

The R573J23610 is a SP6T coaxial switch from the Ramses series by Radiall. It features a 2.4mm connector interface and operates up to 50 GHz with 50 Ohm impedance. The device utilizes latching technology controlled by 28 Vdc positive common pins. Key electrical specifications include a VSWR of 1.2:1, insertion loss of 0.2 dB, and isolation of 80 dB. It supports a mechanical life of 5,000,000 cycles within an operating temperature range of -40 C to +85 C.

Feature Summary

• SP6T configuration with 2.4mm connector interface for high-frequency signal routing
• Latching mechanism maintained by 28 Vdc positive common control pins
• High-performance RF characteristics including low insertion loss and high isolation

Applications

• Test and measurement instrumentation requiring precise signal switching
• Telecommunications infrastructure systems
• Aerospace and defense electronic systems

Procurement Notes

Verify current availability status directly with Radiall or authorized distributors as supply conditions may vary. Confirm that the 28 Vdc latching control requirements align with system power designs. Ensure the 2.4mm connector type matches existing board layouts. Check RoHS compliance documentation for specific regulatory needs. Validate environmental ratings against operational temperature extremes.

Selection Notes

Select this component when SP6T switching at frequencies up to 50 GHz is required. The latching feature eliminates continuous power consumption for state maintenance. The 2.4mm interface offers superior performance over SMA at higher frequencies. Consider the 28 Vdc control voltage compatibility with available logic levels. Evaluate the mechanical life cycle against expected switching frequency in the application.

Part Context

This part belongs to the Ramses family of coaxial switches designed for demanding RF applications. The series provides various configurations and connector types to support different frequency ranges. The R573J23610 specifically addresses high-frequency needs using the 2.4mm interface standard. It represents a robust solution for critical signal path management in professional equipment.

Replacement Considerations

Consult official Radiall substitution guides for verified alternatives. Cross-reference technical parameters such as frequency range, connector type, and control voltage before considering substitutes. Generic RF switches may not match the specific 50 GHz performance or 2.4mm interface requirements.