RL-4400-2-2,50

$2.30

Description：CMC 2.5MH 1.6A 2LN THROUGH HOLE
Series：-
Mfr：Renco Electronics, Inc.
Package：Bulk

SKU:5ee290e87fe1 Category: Common Mode Chokes Brand: Renco Electronics, Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

RL-4400-2-2,50 is listed in the Common Mode Chokes range at ChipApex. The manufacturer field lists Renco Electronics, Inc.. Its product description is CMC 2.5MH 1.6A 2LN THROUGH HOLE. Review the specifications below when checking this part for your BOM.

Common Mode Chokes specifications for RL-4400-2-2,50

Description：CMC 2.5MH 1.6A 2LN THROUGH HOLE
Series：-
Mfr：Renco Electronics, Inc.
Package：Bulk
Filter Type：Power Line
Number of Lines：2
Current Rating (Max)：1.6A
DC Resistance (DCR) (Max)：190mOhm
Voltage Rating - DC：250V
Voltage Rating - AC：-
Operating Temperature：-55°C ~ 130°C
Ratings：-
Approval Agency：-
Features：-
Mounting Type：Through Hole
Size / Dimension：0.752" L x 0.650" W (19.10mm x 16.50mm)
Height (Max)：0.850" (21.60mm)
Package / Case：Vertical, 4 PC Pin
Inductance @ Frequency：2.5 mH @ 10 kHz

Common Mode Chokes datasheet and documents for RL-4400-2-2,50

RL-4400-2-2,50

Common Mode Chokes Overview

The RL-4400-2-2,50 is a two-line common mode choke manufactured by Renco Electronics, Inc., designed for through-hole mounting. It features an inductance of 2.5 mH measured at 10 kHz and supports a maximum current rating of 1.6 A. The component exhibits a direct current resistance (DCR) of 190 mOhm. It utilizes a vertical package configuration with four pins and measures approximately 19.10 mm in length, 16.50 mm in width, and up to 21.60 mm in height.

Common Mode Chokes Feature Summary

Provides common mode noise suppression for two-line circuits
Designed for reliable through-hole PCB integration
Vertical pin configuration facilitates compact board layout

Common Mode Chokes Applications

Power supply input filtering
EMI suppression in electronic equipment
Signal integrity protection in data lines

Common Mode Chokes Procurement Notes

Verify the specific tolerance and thermal characteristics against the official datasheet before finalizing the design. Confirm that the physical dimensions align with the target printed circuit board footprint. Ensure the operating temperature range meets the environmental requirements of the end application. Request samples to validate performance within the actual circuit under load conditions prior to mass production.

Common Mode Chokes Selection Notes

Select this component when a 2.5 mH inductance value is required for common mode interference reduction. The 1.6 A current rating suits applications with moderate power consumption levels. Consider the vertical form factor if space constraints favor a low-profile or upright mounting style. Evaluate the 190 mOhm DCR to ensure it does not cause excessive voltage drop in the specific circuit path.

Common Mode Chokes Part Context

This part belongs to the RL-4400 series of common mode chokes produced by Renco Electronics, Inc. The series typically offers various inductance values and current ratings to accommodate different filtering needs. These components are engineered for robust performance in industrial and commercial electronics where electromagnetic interference must be controlled effectively.