RL-9750-1HL-5,4

$3.00

Description：CMC 5.4MH 1.1A 2LN THROUGH HOLE
Series：-
Mfr：Renco Electronics, Inc.
Package：Bulk

SKU:daae1dc473f3 Category: Common Mode Chokes Brand: Renco Electronics, Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

RL-9750-1HL-5,4 is listed in the Common Mode Chokes range at ChipApex. The manufacturer field lists Renco Electronics, Inc.. Its product description is CMC 5.4MH 1.1A 2LN THROUGH HOLE. Review the specifications below when checking this part for your BOM.

Common Mode Chokes specifications for RL-9750-1HL-5,4

Description：CMC 5.4MH 1.1A 2LN THROUGH HOLE
Series：-
Mfr：Renco Electronics, Inc.
Package：Bulk
Filter Type：Power Line
Number of Lines：2
Current Rating (Max)：1.1A
DC Resistance (DCR) (Max)：308mOhm
Voltage Rating - DC：-
Voltage Rating - AC：-
Operating Temperature：-40°C ~ 130°C
Ratings：-
Approval Agency：-
Features：-
Mounting Type：Through Hole
Size / Dimension：0.913" L x 0.610" W (23.20mm x 15.50mm)
Height (Max)：0.886" (22.50mm)
Package / Case：Vertical, 4 PC Pin
Inductance @ Frequency：5.4 mH @ 10 kHz

Common Mode Chokes datasheet and documents for RL-9750-1HL-5,4

RL-9750-1HL-5,4

Common Mode Chokes Overview

The RL-9750-1HL-5,4 is a single-phase EMI filter manufactured by Renco Electronics, Inc. It functions as a two-line common mode choke designed for through-hole mounting. The component features an inductance of 5.4 mH measured at 10 kHz and supports a current rating of 1.1 A. Its direct current resistance (DCR) is specified as 308 mOhm. The device utilizes a vertical housing configuration with four printed circuit board pins. Maximum height is 22.50 mm. The package is RoHS compliant.

Common Mode Chokes Feature Summary

Provides common mode noise suppression for two-line circuits
Designed for through-hole PCB integration
Vertical housing structure with four-pin termination

Common Mode Chokes Applications

Single-phase EMI filtering
AC line signal conditioning
Common mode choke applications

Common Mode Chokes Procurement Notes

Verify the specific suffix designation to ensure correct inductance value matching. Confirm that the through-hole pin spacing aligns with the target PCB layout. Check RoHS compliance status if required by project specifications. Ensure the 1.1 A current rating meets the operational requirements of the intended circuit application.

Common Mode Chokes Selection Notes

Select this component when a 5.4 mH inductance value is required for common mode noise reduction. Consider the 1.1 A current capacity and 308 mOhm DCR for power loss calculations. Evaluate the vertical form factor against available board space constraints. Verify compatibility with single-phase AC line filtering requirements.

Common Mode Chokes Part Context

This part belongs to the RL-9750-1HL series from Renco Electronics, Inc., which specializes in custom inductors, transformers, chokes, and coils. The manufacturer was acquired by Standex Electronics in 2020. The series includes various configurations for surface mount and through-hole applications, focusing on EMI suppression and power management components.