RL-9750-3-12,0

$4.49

Description：CM CHOKE 12MH 212MOHM TH
Series：-
Mfr：Renco Electronics, Inc.
Package：Bulk

SKU:653370dbef2e Category: Common Mode Chokes Brand: Renco Electronics, Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

RL-9750-3-12,0 is listed in the Common Mode Chokes range at ChipApex. The manufacturer field lists Renco Electronics, Inc.. Its product description is CM CHOKE 12MH 212MOHM TH. Review the specifications below when checking this part for your BOM.

Common Mode Chokes specifications for RL-9750-3-12,0

Description：CM CHOKE 12MH 212MOHM TH
Series：-
Mfr：Renco Electronics, Inc.
Package：Bulk
Filter Type：Power Line
Number of Lines：2
Current Rating (Max)：1.6A
DC Resistance (DCR) (Max)：212mOhm
Voltage Rating - DC：-
Voltage Rating - AC：-
Operating Temperature：-40°C ~ 130°C
Ratings：-
Approval Agency：-
Features：-
Mounting Type：Through Hole
Size / Dimension：1.299" L x 0.827" W (33.00mm x 21.00mm)
Height (Max)：1.181" (30.00mm)
Package / Case：Vertical, 4 PC Pin
Inductance @ Frequency：-
Qualification：-
Grade：-

Common Mode Chokes datasheet and documents for RL-9750-3-12,0

RL-9750-3-12,0

Common Mode Chokes Overview

The RL-9750-3-12,0 is a two-line common mode choke manufactured by Renco Electronics, Inc. It features an inductance of 12 mH and a maximum DC resistance (DCR) of 212 mOhm per line. The component supports a current rating of 1.6 A and utilizes a vertical through-hole mounting configuration with four pins. Physical dimensions include a length of 33.00 mm, a width of 21.00 mm, and a maximum height of 30.00 mm.

Common Mode Chokes Feature Summary

Provides common mode noise suppression for dual-line circuits
Designed for through-hole PCB integration
Constructed for high inductance stability

Common Mode Chokes Applications

Signal line filtering in electronic equipment
Power supply input stage noise reduction
Data communication interface protection

Common Mode Chokes Procurement Notes

Verify the complete part number including the suffix to ensure correct inductance and pin configuration. Confirm that the 1.6 A current rating meets the specific circuit requirements. Check RoHS compliance status if environmental regulations apply to the assembly process. Ensure the through-hole footprint matches the target PCB layout dimensions.

Common Mode Chokes Selection Notes

Select this component when a 12 mH inductance value is required for common mode rejection. The 212 mOhm DCR specification influences power loss calculations in the design phase. The vertical package style must be accommodated within the enclosure height constraints. Consider the 1.6 A saturation current limit when designing for peak load conditions.

Common Mode Chokes Part Context

This component belongs to the RL-9750 series of common mode chokes from Renco Electronics. The series offers various inductance values tailored for different filtering needs. The RL-9750-3-12,0 specifically targets applications requiring higher inductance for low-frequency noise attenuation compared to lower-value variants in the same family.

Common Mode Chokes Replacement Considerations

Cross-reference with other 12 mH common mode chokes having similar 4-pin through-hole footprints. Verify that substitute components maintain equivalent current ratings and physical dimensions for board compatibility.