RLD-2240-5-24

Power Transformers Overview

The RLD-2240-5-24 is a control power transformer manufactured by Renco Electronics, Inc. It features an 8-pin through-hole package and operates at 50/60 Hz with a 12 VA rating. The primary winding supports 115V or 230V input in parallel configuration. The secondary output provides 12V at 1A in parallel or 24V at 500mA in series.

Power Transformers Feature Summary

• Dual voltage primary input capability for flexible integration into different supply networks
• Configurable secondary outputs allowing selection between parallel low-voltage or series higher-voltage modes
• Through-hole mounting design suitable for standard printed circuit board assembly processes

Power Transformers Applications

• Industrial control panel power distribution
• Machine tool electrical systems
• Automation equipment internal power supplies

Power Transformers Procurement Notes

Verify the specific pinout configuration against your schematic before procurement. Confirm that the 12 VA power rating meets the thermal and load requirements of your application. Ensure the through-hole footprint matches your PCB layout constraints to avoid mechanical interference during assembly.

Power Transformers Selection Notes

Select this component when a compact 12 VA isolation transformer is required for industrial environments. Consider the dual secondary configuration if both 12V and 24V rails are needed from a single unit. Verify that the 8-pin header style aligns with your existing connector or direct soldering strategy.

Power Transformers Part Context

This part belongs to the RLD-2240 series of split bobbin power transformers from Renco Electronics. The series offers various voltage combinations and power ratings tailored for control applications. The RLD-2240-5-24 specifically addresses needs for 12 VA isolation with flexible secondary output options.

Power Transformers Replacement Considerations

Cross-reference with other Renco RLD-2240 variants such as RLD-2240-4-48 or RL-2240-5-24 for similar form factors. Ensure any substitute maintains the same 12 VA rating and 8-pin through-hole package dimensions to fit existing enclosures and PCB layouts without modification.