RP100-10-.47-W

Overview

The Astrodyne TDI RP100-10-.47-W is a compact, single-phase EMC/EMI power line filter designed for general-purpose electromagnetic interference suppression. It features a 250 VAC voltage rating and supports a continuous current of 10 A. The unit utilizes a capacitance value of 0.47 nF to achieve noise attenuation in standard 50 Hz or 60 Hz operating frequencies. Designed for chassis mounting with wire termination, this component ensures reliable performance within an operating temperature range of -25°C to +40°C.

Feature Summary

• Single-stage filtering architecture for effective EMI/EMC suppression
• Compact physical design suitable for space-constrained installations
• General-purpose application capability for broad industrial use

Applications

• General-purpose electronic equipment requiring EMI suppression
• Chassis-mounted power input stages
• Industrial control systems

Procurement Notes

Verify the specific capacitance value against official datasheets, as similar part numbers in the RP100 series may vary significantly (e.g., 2.2 nF vs 0.47 nF). Confirm that the wire termination style matches your assembly requirements. Ensure the 10 A current rating aligns with your system's load specifications before procurement.

Selection Notes

Select this model when a low-capacitance, high-current single-phase filter is required for chassis mounting. Compare leakage current limits if strict safety isolation is needed. Verify that the 250 VAC rating is sufficient for your local mains voltage environment. Consider the wire termination method during PCB or harness design.

Part Context

This component belongs to the RP100 series from Astrodyne TDI, which specializes in compact power line filters. The series offers various configurations differing by current rating, capacitance, and termination type. This specific variant focuses on balancing high current handling with minimal capacitive coupling for sensitive applications.

Replacement Considerations

Direct substitutes within the RP100 series include models like RP100-10-2.2-W or RP100-10-2.2-QD, though these differ in capacitance and termination style. Any replacement must match the 10 A current rating and 250 VAC voltage limit to maintain circuit integrity.