ChipApex | Global Electronic Components Supplier
SEARCH
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：LINE FILTER 250VAC 30A CHASS MNT
- Series：RP125
- Mfr：Astrodyne TDI
- Package：Box
- Filter Type：Single Phase
- Configuration：Single Stage
- Voltage - Rated DC：-
- Voltage - Rated AC：250V
- Current：30 A
- Frequency - Operating：50/60Hz
- Applications：General Purpose
- Approval Agency：CE, cURus, SEMKO
- Operating Temperature：-25°C ~ 100°C
- Mounting Type：Chassis Mount
- Termination Style：Threaded Post (M4)
- Inductance：-
Download product information
Overview
The RP125-30-4.7-S is a high-performance single-stage power line filter manufactured by Astrodyne TDI, designed for 1-phase applications operating at 50 Hz and 60 Hz. It features a 250 VAC voltage rating and a 30 A current capacity. The unit utilizes chassis mount installation with stud termination and exhibits a leakage current of 90 uA. Certified under cURus and EN60939 standards, it operates within a temperature range of -25 C to +40 C. Physical dimensions are 94 mm in length, 58 mm in width, and 46 mm in height, with a unit weight of approximately 408 g.
Feature Summary
- Single-stage filtering architecture for effective noise suppression
- Stud termination for secure mechanical mounting
- Low leakage current design for safety compliance
Applications
- Industrial machinery power conditioning
- Medical equipment power supplies
- Commercial IT infrastructure protection
Procurement Notes
Verify the specific suffix 'S' against official datasheets to confirm stud termination compatibility. Ensure chassis mounting holes align with the specified 94 mm x 58 mm footprint. Confirm that the 90 uA leakage current meets the safety requirements of the final assembly. Validate that the 30 A continuous current rating exceeds the peak load demands of the connected circuitry.
Selection Notes
Select this component when a single-stage solution is sufficient for the required attenuation levels. Compare the 30 A rating against similar models like the RP125-45 series if higher current capacity is needed. Consider the physical dimensions relative to available enclosure space. Verify that the stud termination method matches the existing panel design constraints.
Part Context
This model belongs to the RP125 series of power line filters from Astrodyne TDI. It shares the same form factor and mounting style as other variants in the series, differing primarily in current ratings and internal component values. The series is designed for general-purpose EMI/RFI suppression in single-phase AC power lines.
FAQ
What is the maximum leakage current for this filter?
The maximum leakage current is specified as 90 uA.
Does this filter support three-phase connections?
No, it is designed exclusively for 1-phase single-stage applications.
