RP130-10-0-W

Overview

The RP130-10-0-W is a single-phase, single-stage power line filter from the Astrodyne TDI RP130 series. It features a chassis mount design with wire leads for termination. The component is rated for 250 VAC and supports a continuous current of 10 A at operating frequencies of 50 Hz and 60 Hz. It includes X and Y capacitors to provide EMI/RFI suppression. The unit complies with UL, CSA, and EN safety standards.

Feature Summary

• Single-stage filtering architecture for effective noise attenuation
• Chassis mounting configuration with wire lead terminations
• Compliance with major international safety certifications

Applications

• Industrial equipment power input stages
• Medical device power supplies
• Commercial IT hardware EMC protection

Procurement Notes

Verify the specific datasheet version for the RP130-10-0-W to confirm exact dimensional tolerances and terminal specifications. Ensure the application voltage does not exceed the 250 VAC rating. Confirm that the chassis mounting holes align with the mechanical drawings provided in the official documentation before integration.

Selection Notes

Select this model when a single-phase solution is required for currents up to 10 A. The wire lead termination style suits applications where direct wiring to PCBs or terminal blocks is preferred over panel connectors. Verify that the leakage current characteristics meet the safety requirements of the final end-use equipment.

Part Context

This component belongs to the RP130 series of high-performance power line filters. The series offers various current ratings and capacitance options to suit different EMI suppression needs. The RP130-10-0-W specifically addresses mid-range current applications requiring robust common-mode and differential-mode noise reduction.

Replacement Considerations

Cross-reference with other RP130 series variants such as RP130-10-3.3-W if different capacitance values are needed. Ensure any substitute maintains the same 10 A current rating and 250 VAC voltage rating. Verify compatibility with existing chassis mounting structures.