RP180-20-4.7-W

Overview

The Astrodyne TDI RP180-20-4.7-W is a single-stage power line filter designed for AC power input applications. It features an IEC inlet connector configuration and supports a rated current of 20 A at 250 VAC. The unit incorporates a 4.7 nF capacitance value to provide electromagnetic interference suppression. Designed for chassis or panel mounting, this component operates within standard industrial frequency ranges of 50 Hz and 60 Hz. It is constructed to meet relevant safety and compliance standards for electronic equipment power filtering.

Feature Summary

• Single-stage filtering architecture for effective noise attenuation
• Integrated IEC inlet connector for direct power cord attachment
• High current handling capability suitable for demanding loads

Applications

• Industrial control panels requiring EMI suppression
• Medical equipment power inputs
• Test and measurement instrument power stages

Procurement Notes

Verify the specific datasheet version for the RP180-20-4.7-W to confirm exact dimensional tolerances and terminal configurations. Ensure that the mounting hardware matches the chassis cutout requirements. Cross-reference the certification marks with local regulatory bodies before deployment in regulated environments.

Selection Notes

Select this model when a 20 A rating and integrated IEC inlet are required. The 4.7 nF capacitor value indicates a balance between leakage current limits and common-mode noise reduction. Consider thermal derating if ambient temperatures exceed standard operating ranges specified in the official documentation.

Part Context

This component belongs to the RP180 series of power line filters from Astrodyne TDI. The series typically offers various current ratings and capacitance options to suit different power distribution needs. The suffix 'W' may denote specific packaging or terminal variations compared to other variants in the same family.

Replacement Considerations

Direct substitutes must match the 20 A current rating, 250 VAC voltage rating, and 4.7 nF capacitance. Verify physical footprint compatibility for existing chassis mounts. Check that replacement units hold equivalent UL, CSA, or EN certifications.