RP186-6-10-QD

Overview

The Astrodyne TDI RP186-6-10-QD is a single-phase, single-stage power line filter designed for chassis or panel mounting. It features a C19 power entry receptacle and quick-connect terminals. The component is rated for 250 VAC and 6 A at 50/60 Hz. Key electrical specifications include a capacitance of 10 nF and a maximum leakage current of 800 uA. It operates within a temperature range up to +85°C and complies with EN60939 standards.

Feature Summary

• Integrates a C19 power inlet receptacle for direct equipment connection
• Provides high-performance EMI suppression in a compact single-stage configuration
• Utilizes quick-connect tab terminals for simplified circuit integration

Applications

• Medical equipment power supplies
• Industrial control systems
• Test and measurement instruments

Procurement Notes

Verify the specific suffix QD confirms quick-connect termination style against the official datasheet. Ensure the C19 receptacle orientation and terminal pitch match your PCB or wire harness design. Confirm RoHS compliance status and certification marks (EN60939) are required for your target market regulations before finalizing procurement.

Selection Notes

Select this model when a built-in IEC C19 inlet is preferred over separate connector assembly. The 6 A rating suits moderate power loads. Verify that the 10 nF capacitance provides sufficient attenuation for your specific noise spectrum without exceeding leakage current limits imposed by safety standards for the end application.

Part Context

This component belongs to the RP186 series of high-performance power line filters from Astrodyne TDI. The series offers various current ratings and termination options. The RP186-6-10-QD specifically combines a 6 A capacity with a 10 nF filter stage and integrated C19 inlet, distinguishing it from models with different currents or terminal types.

Replacement Considerations

Direct substitutes must match the 6 A current, 250 VAC voltage, C19 inlet, and quick-connect terminals. Compare insertion loss curves and physical dimensions to ensure compatibility. Verify that alternative part numbers maintain the same single-stage topology and leakage current characteristics.