RP187-6-0-W

Overview

The RP187-6-0-W is a power line filter from the Astrodyne TDI RP135 series. It is designed for single-phase applications with a rated voltage of 250 VAC and a current rating of 6 A. The unit features chassis mount installation with stud termination. Key electrical specifications include a leakage current of 0 A and a capacitance of 0 pF. It operates at frequencies of 50 Hz and 60 Hz. The component complies with cURus and EN133200 standards. Physical dimensions are approximately 36.5 mm in length, 20 mm in height, and it weighs 181.437 g.

Feature Summary

• Single-stage power line filtering architecture
• Zero leakage current design for safety compliance
• Chassis mount construction with stud termination
• IEC inlet form factor integration

Applications

• Medical equipment power input stages
• Industrial control systems requiring low leakage
• Test and measurement instrumentation
• Commercial IT hardware power supplies

Procurement Notes

Verify specific regulatory certifications such as cURus and EN133200 against local regional requirements before integration. Confirm mechanical mounting hole patterns and stud thread sizes match the target chassis design. Ensure the zero leakage specification aligns with strict medical or sensitive electronic safety limits. Check availability status as supply may be restricted in certain regions.

Selection Notes

Select this model when zero leakage current is critical for system safety or operator protection. The 6 A rating suits moderate power loads within single-phase 250 VAC systems. Chassis mounting requires adequate panel thickness for secure stud fastening. Compare against RP187 variants with higher capacitance if EMI suppression levels differ from project needs.

Part Context

This component belongs to the RP135 series of power line filters manufactured by Astrodyne TDI. The series focuses on high-performance filtering solutions for various industrial and commercial applications. The RP187 sub-series typically integrates IEC inlet connectors, providing a compact solution for power entry modules.

Replacement Considerations

The RP187-6-4.7-QD is a documented dual-stage variant within the same product family. Verify if the increased capacitance and dual-stage architecture meet specific EMI requirements where the zero-capacitance RP187-6-0-W was originally specified.