RP210-10-.47-QD

Overview

The RP210-10-.47-QD is a single-stage, one-phase power line filter from the Astrodyne TDI RP210 series. It features a 250 VAC voltage rating and a 10 A current capacity. The unit utilizes quick connect terminals for termination and is designed for chassis mounting. Key electrical specifications include a capacitance of 0.47 nF and a leakage current of 80 uA. It operates at 50 Hz or 60 Hz frequencies. Dimensions are approximately 29 mm in height and 51 mm in length. Certifications include cURus and EN60939 compliance.

Feature Summary

• Single-stage filtering architecture for effective noise suppression
• Low leakage current design suitable for sensitive equipment
• Chassis mount configuration with quick connect terminals

Applications

• Industrial control systems requiring EMI/RFI suppression
• Medical equipment power inputs
• Test and measurement instrumentation

Procurement Notes

Verify that the specific part number RP210-10-.47-QD matches the required 10 A rating and 0.47 nF capacitance. Confirm terminal type compatibility with existing wiring harnesses. Ensure chassis mounting space accommodates the specified dimensions. Check for updated certification requirements such as cURus or EN60939 depending on the target market regulations.

Selection Notes

Select this component when a single-stage filter is sufficient for the application's noise environment. The 10 A rating supports moderate power loads. The low leakage current of 80 uA makes it appropriate for applications where safety isolation is critical. Compare against two-stage alternatives if higher attenuation is needed.

Part Context

This component belongs to the RP210 series of surface filter units. The series offers various current ratings and capacitance values. The RP210 designation indicates a specific form factor within the Astrodyne TDI portfolio. Other variants in the series may differ in current handling or terminal style.

Replacement Considerations

Direct substitutes include other RP210 series models with matching 10 A ratings. Verify that replacement parts maintain the same 0.47 nF capacitance value. Ensure terminal types and mounting dimensions are compatible with the existing assembly.