RP210-16-1-W

Overview

The Astrodyne TDI RP210-16-1-W is a compact, dual-stage power line filter designed for single-phase applications. It features a 16 A current rating and a 250 VAC voltage rating. The unit utilizes wire termination for chassis mounting. Key electrical parameters include a capacitance of 1 nF and a maximum leakage current of 350 uA. It operates at standard frequencies of 50 Hz and 60 Hz. The component complies with UL, CSA, and EN standards. Physical dimensions are approximately 29 mm in height and 51 mm in length.

Feature Summary

• Dual-stage filtering architecture for enhanced noise attenuation
• Compact form factor suitable for space-constrained chassis installations
• Wire termination style for direct connection flexibility

Applications

• Medical equipment power supplies
• Industrial control systems
• Test and measurement instrumentation

Procurement Notes

Verify the specific suffix 'W' confirms wire termination against the official datasheet. Confirm that the 16 A rating aligns with the system's continuous load requirements. Ensure chassis mounting provisions match the physical footprint specifications. Cross-reference compliance certifications such as UL and CSA with regional regulatory needs before finalizing procurement.

Selection Notes

Select this model when high attenuation is required in a limited space. The dual-stage design offers superior performance compared to single-stage alternatives. Verify that the wire termination method suits the existing wiring harness. Ensure the 16 A current capacity exceeds the peak operational demands of the connected load to maintain safety margins.

Part Context

This component belongs to the RP210 series of power line filters from Astrodyne TDI. The series focuses on compact, high-performance filtration solutions. Other variants in the series differ by current rating, capacitance value, and termination type. This specific model represents a balance between high current handling and small physical size.

Replacement Considerations

Direct substitutes within the same series require matching the 16 A rating and dual-stage topology. Check alternative part numbers for identical wire termination and chassis mount compatibility. Verify that replacement units maintain the same leakage current limits and compliance certifications.