RP220-6-0-S

Overview

The RP220-6-0-S is a single-phase, two-stage power line filter from the Astrodyne TDI RP220 series. It features a 6 A current rating and a 250 VAC voltage rating. The component utilizes quick connect termination and chassis mount installation. Key electrical parameters include 0 nF capacitance and 800 uA leakage current. It operates at 50 Hz or 60 Hz frequencies with dimensions of 93 mm length, 56 mm width, and 45 mm height.

Feature Summary

• Dual-stage filtering architecture for enhanced noise attenuation
• Chassis mount design for secure mechanical integration
• Quick connect termination for simplified wiring

Applications

• Industrial equipment power conditioning
• Medical device power supply protection
• Commercial electronics EMI suppression

Procurement Notes

Verify compliance certifications such as UL, CSA, and EN against specific regional requirements. Confirm that the quick connect terminal type matches existing harness specifications. Ensure chassis mounting holes align with panel cutouts given the fixed physical dimensions. Validate thermal management needs within the intended enclosure environment.

Selection Notes

Select this model when dual-stage performance is required for low-current applications up to 6 A. The zero capacitance value indicates suitability where leakage current must be strictly controlled below standard thresholds. Compare against single-stage alternatives if space constraints allow for higher capacitance values in smaller packages.

Part Context

This component belongs to the RP220 series, which offers high-performance filtering solutions. The series includes variants with different current ratings and capacitance values. The RP220-6-0-S specifically addresses applications needing minimal leakage current while maintaining effective electromagnetic interference reduction through its two-stage topology.

Replacement Considerations

Direct substitutes within the same series include RP220-6-4.7-QD for similar current but different capacitance. Cross-series comparisons may involve RP135 models for single-stage needs. Verify pinout compatibility and mounting hole patterns before substituting.