RP410HP-10-22-S

Power Line Filter Modules Overview

The RP410HP-10-22-S is an ultra-compact, high-performance three-phase wye single-stage power line filter manufactured by Astrodyne TDI. It features a rated current of 10 A and operates at voltages up to 480 V AC at 50/60 Hz. The unit utilizes a capacitance value of 22 nF per phase for EMI suppression. Termination is provided via threaded posts (M5). The component weighs approximately 317.5 g and belongs to the RP350 series.

Power Line Filter Modules Feature Summary

• Single-stage EMC/EMI filtering architecture designed for three-phase wye configurations
• Ultra-compact physical form factor optimized for space-constrained installations
• High-performance attenuation characteristics suitable for sensitive electronic environments

Power Line Filter Modules Applications

• Industrial machinery control systems
• Medical equipment power supplies
• General-purpose appliance integration

Power Line Filter Modules Procurement Notes

Verify that the M5 threaded post termination matches the mating hardware in the target assembly. Confirm the 10 A continuous current rating aligns with the maximum load requirements. Ensure the 480 V AC voltage rating exceeds the system operating voltage. Check for required certifications such as CE, CSA, cURus, or ENEC based on regional compliance mandates.

Power Line Filter Modules Selection Notes

Select this model when a three-phase wye configuration is required with a 10 A current capacity. The 22 nF capacitance value provides specific noise attenuation profiles; verify if higher or lower capacitance alternatives are needed. Consider the M5 stud termination if quick disconnect options are not preferred. Compare against other RP410HP variants for different current ratings like 6 A or 20 A if load conditions change.

Power Line Filter Modules Part Context

This component is part of the RP350 series from Astrodyne TDI, which focuses on compact power line filters. It shares design similarities with models like RP410HP-6-22-QD and RP410HP-10-22-W, differing primarily in termination style and specific electrical parameters within the same high-performance family.

Power Line Filter Modules Replacement Considerations

Direct substitutes include RP410HP-10-22-W for wire termination or RP410HP-10-22-QD for quick disconnect terminals, assuming identical electrical specifications are acceptable.