S29GL128P90FAIR10

Memory IC Overview

The Infineon S29GL128P90FAIR10 is a 128 Mbit NOR Flash memory device manufactured using 90 nm MirrorBit process technology. It features a parallel interface with an asynchronous timing type and supports a 16-bit data bus width. The device operates within a voltage range of 2.7 V to 3.6 V, with a typical active read current of 30 mA at 5 MHz. It offers a random access time of 90 ns and a page access time of 25 ns under regulated VCC conditions. The component is housed in a 64-ball Fortified Ball Grid Array (FBGA) package and is rated for industrial operating temperatures from -40°C to +85°C.

Memory IC Feature Summary

• Supports VersatileIO control allowing I/O signal levels to operate from 1.65 V to VCC
• Includes a 32-word write buffer to reduce overall programming time for multiple-word updates
• Features a Secured Silicon Sector region for permanent identification via Electronic Serial Number
• Provides program and erase suspend/resume capabilities for efficient system operation

Memory IC Applications

• Embedded applications requiring high density and lower power consumption
• Systems utilizing Common Flash Interface (CFI) standards
• FPGA configuration storage solutions

Memory IC Procurement Notes

Verify the specific ordering suffix 'R1' corresponds to the required VersatileIO voltage range and sector protection settings. Confirm the package material set matches lead-free requirements if applicable. Ensure compatibility with the 64-ball FBGA footprint dimensions and soldering profiles specified in the datasheet physical dimensions section.

Memory IC Selection Notes

Select this component when a 128 Mbit capacity with 90 ns random access speed is required. The 64-ball FBGA package is suitable for space-constrained designs. Consider the VersatileIO feature if the host system requires flexible I/O voltage levels between 1.65 V and 3.6 V. Verify that the industrial temperature range meets the environmental specifications of the target application.

Memory IC Part Context

This part belongs to the S29GL-P family of 3 V Page Flash memories. The family includes densities ranging from 128 Mbit to 1 Gbit, all fabricated on 90 nm MirrorBit technology. The GL-P series is distinguished by its uniform 64 Kword sector architecture and support for advanced sector protection methods, including persistent and password-based locking mechanisms.

Memory IC Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material.