SA605DK/01,118

Description：RF RX ASK/FSK 0HZ-500MHZ 20SSOP
Series：SA605
Mfr：NXP USA Inc.
Package：Tape & Reel (TR)

SKU:c3b4bf87a0ac Category: RF Receivers Brand: NXP USA Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

SA605DK/01,118 is listed in the RF Receivers range at ChipApex. The manufacturer field lists NXP USA Inc.. Its product description is RF RX ASK/FSK 0HZ-500MHZ 20SSOP. Review the specifications below when checking this part for your BOM.

RF Receivers specifications for SA605DK/01,118

Description：RF RX ASK/FSK 0HZ-500MHZ 20SSOP
Series：SA605
Mfr：NXP USA Inc.
Package：Tape & Reel (TR)
Frequency：0Hz ~ 500MHz
Sensitivity：-
Data Rate (Max)：-
Modulation or Protocol：ASK, FSK
Applications：FM Remote Receiver
Current - Receiving：5.7mA
Data Interface：PCB, Surface Mount
Memory Size：-
Antenna Connector：PCB, Surface Mount
Features：RSSI Equipped
Voltage - Supply：4.5V ~ 8V
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：20-LSSOP (0.173", 4.40mm Width)
Supplier Device Package：20-SSOP
Grade：-
Qualification：-

RF Receivers datasheet and documents for SA605DK/01,118

SA605DK/01,118

RF Receivers Overview

The SA605DK/01,118 is a monolithic FM intermediate frequency (IF) system IC manufactured by NXP USA Inc. It integrates a mixer with an oscillator and two limiting IF amplifiers within a single package. The device operates on a supply voltage ranging from 4.5V to 8V and draws a typical operating current of 5.7mA. Designed for surface mount installation, it utilizes a 20-LSSOP package with a width of 4.40mm. The component supports an operating temperature range of -40°C to 85°C and features a noise figure of 6.2dB. It is RoHS3 compliant and classified under ECCN EAR99.

RF Receivers Feature Summary

Integrates a mixer/oscillator stage with dual limiting intermediate frequency amplifiers
Designed for low-power FM receiver applications
Supports quadrature detection functionality

RF Receivers Applications

FM radio receivers
Portable communication devices
Consumer electronics requiring FM demodulation

RF Receivers Procurement Notes

Verify the specific ordering suffix and packaging configuration when sourcing this component. Confirm that the supplier provides documentation matching the NXP USA Inc. part number SA605DK/01,118. Ensure compatibility with the required 20-LSSOP footprint and verify RoHS3 compliance status prior to procurement to meet regulatory standards.

RF Receivers Selection Notes

Select this component for designs requiring a complete FM IF solution in a compact surface-mount form factor. Consider the 4.5V to 8V supply range and 5.7mA current consumption against power budget constraints. Evaluate the 20-LSSOP package dimensions for PCB layout compatibility. Verify thermal performance within the specified -40°C to 85°C operating range for the target environment.

RF Receivers Part Context

This part belongs to the SA6xx series of RF/IF building blocks from NXP. These components are designed as high-performance monolithic systems for radio applications. The SA605 specifically targets FM IF processing, combining mixing and amplification functions to simplify receiver architecture compared to discrete solutions.