SC16IS760IPW,128

Controllers Overview

The SC16IS760IPW,128 is a single-channel UART with an I2C-bus or SPI interface. It features 64-byte transmit and receive FIFOs and supports data rates up to 5 Mbit/s. The device operates at 3.3 V or 2.5 V and includes eight programmable I/O pins. It supports IrDA SIR speeds up to 1.152 Mbit/s and SPI clock speeds up to 15 Mbit/s. The component is housed in a TSSOP24 package.

Controllers Feature Summary

• Supports high-speed SPI communication up to 15 Mbit/s
• Includes built-in IrDA encoder and decoder for SIR speeds up to 1.152 Mbit/s
• Provides eight additional programmable general-purpose input/output pins
• Features fully bidirectional protocol conversion between I2C/SPI and RS-232/RS-485

Controllers Applications

• Factory automation and process control systems
• Portable and battery-operated devices requiring low power consumption
• Cellular data devices needing serial-to-I2C/SPI bridging

Controllers Procurement Notes

Verify the ordering suffix '128' corresponds to the specific reel packaging configuration required for your assembly line. Confirm that the TSSOP24 package dimensions align with your PCB footprint design. Ensure the selected variant meets the industrial temperature range specifications of -40 °C to +95 °C for your intended operating environment.

Controllers Selection Notes

Select this model over the SC16IS750 if your system requires SPI clock speeds exceeding 4 Mbit/s. Choose this part instead of the SC16IS740 when you need the eight extra programmable I/O pins available on the TSSOP24 package. Verify that the host controller supports the target mode only requirements for both I2C and SPI interfaces.

Controllers Part Context

This component belongs to the SC16IS740/750/760 family from NXP Semiconductors. It shares functional and electrical similarities with the SC16IS750 but offers enhanced SPI performance. The internal register set maintains backward compatibility with the widely used 16C450 standard, facilitating software porting from legacy platforms.

Controllers Replacement Considerations

The SC16IS750IPW,128 serves as a functional substitute if SPI speeds above 4 Mbit/s are not required. The SC16IS740IPW lacks the programmable I/O pins and uses a TSSOP16 package, requiring schematic and layout modifications.