SP-1308

Overview

The SP-1308 is a general-purpose dynamic speaker manufactured by Soberton Inc., featuring an integrated enclosure and a top rectangular frame design. It operates with a nominal impedance of 6 Ohms and supports input power levels of 0.25W or 0.5W, with a maximum handling capacity of 800mW to 1W depending on the source specification. The frequency response spans from 400 Hz to 20 kHz, with a self-resonant frequency at 400 Hz. The unit utilizes magnetic technology and contacts for termination.

Feature Summary

• Integrated enclosure design for simplified installation
• Top rectangular frame configuration
• General-purpose dynamic driver technology

Applications

• General audio output devices
• Consumer electronics enclosures
• Industrial control panels

Procurement Notes

Verify the specific impedance tolerance and power rating requirements against your circuit design before procurement. Confirm that the contact termination method matches your assembly process. Ensure the physical dimensions of the top rectangular frame fit within the designated enclosure space. Cross-reference the frequency range specifications to guarantee compatibility with the intended audio signal bandwidth.

Selection Notes

Select this component when a compact, enclosed speaker solution is required for general audio applications. The 6 Ohm impedance suits standard low-voltage audio circuits. Consider the 400 Hz to 20 kHz frequency range for voice or mid-range audio reproduction rather than full-range high-fidelity music. The integrated enclosure reduces mechanical mounting complexity compared to bare driver units.

Part Context

This model belongs to the SP Series of micro speakers produced by Soberton Inc. The series includes various dynamic speaker units designed for integration into electronic devices. The SP-1308 specifically addresses needs for enclosed, ready-to-mount audio components with standardized electrical characteristics.

Replacement Considerations

Direct substitutes are not explicitly confirmed in public documentation. When replacing, ensure the new component matches the 6 Ohm impedance, similar frequency response (400 Hz - 20 kHz), and compatible physical mounting dimensions. Verify that the replacement also includes an enclosure if system integration requires it.