SS25B2036

Overview

The SS25B2036 is a hinged snap-on ferrite core manufactured by Leader Tech Inc. It utilizes material grade 33 and provides an impedance of 27 ohms at 30 MHz. The component features a round shape with a circular inner diameter of 10.5 mm (0.413 inches). External dimensions are specified as 31.80 mm in length, 29.30 mm in width, and 31.80 mm in height. It is designed for free-hanging installation on cables.

Feature Summary

• Hinged snap-on design allows for easy installation onto existing cables without disconnection.
• Utilizes material grade 33 composition for effective electromagnetic interference suppression.
• Round geometry accommodates cylindrical cable profiles.

Applications

• Suppression of electromagnetic interference on power and signal cables
• Noise reduction in electronic equipment wiring harnesses
• Common mode choke applications for single cable lines

Procurement Notes

Verify the specific impedance value and material grade against the manufacturer's current datasheet before integration. Confirm that the internal diameter matches the target cable outer diameter to ensure a secure fit. Check for RoHS compliance status if required by project specifications. Ensure the hinged mechanism is intact upon receipt to maintain functionality.

Selection Notes

Select this component when a non-invasive solution for cable noise suppression is required. The hinged design facilitates retrofitting into assembled systems. Consider the 27-ohm impedance at 30 MHz to determine suitability for the target frequency range of interference. Verify physical clearance constraints given the external dimensions.

Part Context

This part belongs to the Leader Tech ferrite clamp-on core series. These components are passive devices used to attenuate high-frequency noise currents flowing on cables. They function by increasing the impedance of unwanted common-mode signals while allowing differential-mode signals to pass unaffected.

FAQ

What is the mounting style of the SS25B2036?

It features a hinged snap-on design intended for free-hanging installation on cables.

What is the internal diameter of this ferrite core?

The internal diameter is 10.5 mm (0.413 inches).