STA8089GAT

$5.07

Description：AUTOMOTIVE GRADE GPS/GALILEO/GLO
Series：-
Mfr：STMicroelectronics
Package：Tray

SKU:e4525a2e1fc9 Category: RF Receivers Brand: STMicroelectronics

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

STA8089GAT is listed in the RF Receivers range at ChipApex. The manufacturer field lists STMicroelectronics. Its product description is AUTOMOTIVE GRADE GPS/GALILEO/GLO. Review the specifications below when checking this part for your BOM.

RF Receivers specifications for STA8089GAT

Description：AUTOMOTIVE GRADE GPS/GALILEO/GLO
Series：-
Mfr：STMicroelectronics
Package：Tray
Frequency：1.561GHz, 1.575GHz, 1.601GHz
Sensitivity：-162dBm
Data Rate (Max)：12Mbps
Modulation or Protocol：BeiDou, Galileo, GLONASS, GNSS, GPS
Applications：-
Current - Receiving：-
Data Interface：I2C, SPI, UART, USB
Memory Size：256kB SRAM, 512kB ROM
Antenna Connector：PCB, Surface Mount
Features：-
Voltage - Supply：1.08V ~ 1.32V
Operating Temperature：-40°C ~ 105°C (TA)
Mounting Type：Surface Mount
Package / Case：56-VFQFN Exposed Pad
Supplier Device Package：56-VFQFPN (7x7)
Grade：Automotive
Qualification：AEC-Q100

RF Receivers datasheet and documents for STA8089GAT

STA8089GAT

RF Receivers Overview

The STA8089GAT is an automotive-grade, single-die standalone GNSS positioning receiver IC from STMicroelectronics. It supports GPS, Galileo, GLONASS, BeiDou, and QZSS constellations with 48 tracking channels and 2 fast acquisition channels. The device integrates an ARM946 MCU operating up to 196 MHz, embedded SRAM, and multiple interfaces including I2C, SPI, UART, USB 2.0, and dual CAN. It features a sensitivity of -162 dBm in tracking mode and achieves a cold start TTFF of 30 seconds. Operating within -40°C to +105°C, it meets AEC-Q100 standards.

RF Receivers Feature Summary

Multi-constellation support for GPS, Galileo, GLONASS, BeiDou, and QZSS
Integrated ARM946 processor core with embedded memory and real-time clock
Comprehensive connectivity via USB 2.0, dual CAN, UART, and I2C interfaces
Automotive qualification compliant with AEC-Q100 extended temperature range

RF Receivers Applications

Automotive telematics and navigation systems
Fleet management and vehicle tracking solutions
Advanced Driver Assistance Systems (ADAS)
In-car infotainment positioning modules

RF Receivers Procurement Notes

Verify the specific suffix 'GAT' indicates tray packaging rather than reel configuration. Confirm AEC-Q100 certification status and extended temperature grade compliance (-40°C to +105°C) against project requirements. Ensure interface compatibility with target host controllers for USB, CAN, and serial protocols before integration.

RF Receivers Selection Notes

Select this component for applications requiring high integration of RF front-end and baseband processing in a single die. Consider the ARM946 MCU capabilities if on-board data processing or dead reckoning logic is needed. Verify pin-to-pin compatibility with legacy STA8088GA designs if upgrading existing platforms. Assess power supply requirements for the main regulator and backup voltage domains.

RF Receivers Part Context

The STA8089GAT belongs to the Teseo III family of positioning receivers. It is designed as a complete solution embedding the RF front-end, low noise amplifier, and baseband processor. This integration reduces board space and simplifies design complexity compared to discrete RF and baseband combinations.