STGIB20M60TS-L

Overview

The STGIB20M60TS-L is a second-generation SLLIMM intelligent power module featuring a 3-phase IGBT inverter bridge rated at 25 A and 600 V. It integrates two proprietary control ICs for gate driving, freewheeling diodes, and short-circuit rugged trench gate field-stop (TFS) IGBTs. The device supports motor drives operating up to 20 kHz in hard-switching circuitries. Key electrical parameters include a collector-emitter voltage of 600 V, continuous collector current of 25 A at 25°C case temperature, and a short-circuit withstand time of 8 µs. It includes an 85 kΩ NTC thermistor and operates with a supply voltage range of 300 V to 400 V.

Feature Summary

• Integrates short-circuit rugged TFS IGBTs with very fast, soft recovery diodes for high-performance AC motor drives.
• Includes internal bootstrap diode, under-voltage lockout, and smart shutdown function with open-drain fault output.
• Features built-in temperature sensor (TSO) and 85 kΩ NTC thermistor for thermal monitoring.
• Fully isolated package with 1600 Vrms/min isolation rating and UL recognition.

Applications

• 3-phase inverters for motor drives
• Washing machines
• Dryer
• Industrial fans
• Pumps

Procurement Notes

Verify the specific ordering code STGIB20M60TS-L against the latest STMicroelectronics datasheet DS11295 Rev 8. Confirm that the SDIP2B-26L type L1 package matches your PCB footprint requirements. Ensure compatibility with 3.3 V or 5 V TTL/CMOS logic inputs. Check for any recent revisions or obsolescence notices on the official manufacturer website before finalizing procurement specifications.

Selection Notes

Select this module for compact, high-efficiency AC motor drive designs requiring rugged short-circuit tolerance. It is suitable for applications needing direct MCU coupling without optocouplers due to integrated drivers. Consider the 20 kHz switching capability and hard-switching suitability. Evaluate thermal management needs based on the junction-to-case thermal resistance and case operation temperature range of -40 to 125 °C.

Part Context

This component belongs to the SLLIMM (small low-loss intelligent molded module) 2nd series from STMicroelectronics. It is designed as a compact solution for 3-phase induction motor drives. The module combines advanced IGBT technology with integrated protection features, targeting industrial and white goods applications where space efficiency and reliability are critical.

Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.

FAQ

What is the maximum short-circuit withstand time?

The short-circuit withstand time is 8 µs when VCE = 300 V, TJ = 125 °C, VCC = Vboot = 15 V, and VIN = 0 to 5 V.

How does the smart shutdown function operate?

The smart shutdown function uses an internal comparator to detect overcurrent. Upon triggering, it immediately forces LVGx outputs low via a preferential path, minimizing propagation delay, while activating an open-drain output on the SD pin.

What logic levels are supported for input signals?

The device supports 3.3 V and 5 V TTL/CMOS inputs with hysteresis. Low logic level voltage is typically 0.8 V, and high logic level voltage is typically 2 V.