STGIPQ4C60T-HZ

Overview

The STGIPQ4C60T-HZ is a second-generation SLLIMM nano intelligent power module featuring a 3-phase inverter bridge with 6 A continuous collector current and 600 V blocking voltage. It integrates six short-circuit rugged TFS IGBTs, freewheeling diodes, and three half-bridge HVICs for gate driving. The device includes an uncommitted op-amp, overcurrent comparator, NTC thermistor, and internal bootstrap diode. Operating within a -40 to 150 °C junction temperature range, it provides 1800 Vrms isolation and ±2 kV ESD protection.

Feature Summary

• Integrates short-circuit rugged trench gate fieldstop IGBTs with optimized switching speed for low electromagnetic interference.
• Includes three half-bridge HVICs providing undervoltage lockout, shutdown logic, and interlocking functions.
• Features an uncommitted operational amplifier and a dedicated comparator for advanced current sensing and fault protection.
• Incorporates an internal NTC thermistor and up to ±2 kV ESD protection capability.

Applications

• 3-phase induction motor (ACIM) drives
• PMSM / BLDC motor control systems
• Dishwasher and refrigerator compressor motors
• Kitchen hood fans

Procurement Notes

Verify the specific ordering code STGIPQ4C60T-HZ against the manufacturer's official documentation to ensure correct component revision. Confirm that the N2DIP-26L type Z package dimensions align with the target PCB footprint and thermal management requirements. Ensure application circuits comply with the recommended operating conditions and isolation ratings specified in the datasheet.

Selection Notes

Select this module for compact AC motor drive designs requiring integrated gate drivers and protection features. The inclusion of an uncommitted op-amp allows for customized current sensing solutions without external components. Consider the thermal resistance values when designing heat sinks for built-in motor applications where assembly space is limited.

Part Context

This component belongs to the SLLIMM nano 2nd series family of intelligent power modules from STMicroelectronics. These modules are designed to provide high-performance AC motor drive solutions in a rugged, compact form factor. The series targets low-power applications where minimizing assembly space and simplifying design complexity are critical priorities.

Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.

FAQ

What is the function of the T/SD/OD pin?

The T/SD/OD pin serves as the NTC thermistor terminal, the active-low shutdown logic input, and the open-drain output for the internal comparator.

How does the module handle overcurrent protection?

It utilizes an embedded comparator connected to the CIN pin to detect overcurrent faults, which can trigger the shutdown function to disable the high- and low-side drivers.

What logic levels are supported by the HIN and LIN inputs?

The module supports 3.3 V, 5 V, and 15 V TTL/CMOS input comparators with hysteresis and built-in pull-down or pull-up resistors.