STIPQ5M60T-HL

Overview

The STIPQ5M60T-HL is a SLLIMM nano 2nd series intelligent power module featuring a 3-phase inverter bridge with six N-channel MDmesh DM2 MOSFETs. It supports a 600 V blocking voltage and 5 A continuous current per switch, with a maximum on-resistance of 1.0 Ω. The device integrates three half-bridge HVICs for gate driving, an operational amplifier, and a comparator for protection. It provides low electromagnetic interference characteristics and includes undervoltage lockout, smart shutdown, and an internal bootstrap diode. The module utilizes an N2DIP-26L type L package.

Feature Summary

• Integrates six N-channel MDmesh DM2 MOSFETs with intrinsic fast-recovery diodes and three high-voltage half-bridge gate drivers.
• Includes an uncommitted operational amplifier and a comparator for advanced current sensing and fault protection against overtemperature and overcurrent.
• Features optimized pinout for easy board layout and low electromagnetic interference through optimized switching speed.
• Provides isolation ratings of 1500 Vrms/min and UL recognition under file E81734.

Applications

• 3-phase inverters for motor drives
• Dishwashers and refrigerator compressors
• Heating systems and air-conditioning fans
• Draining and recirculation pumps

Procurement Notes

Verify the specific ordering suffix 'HL' to confirm the N2DIP-26L type L tube packing configuration. Ensure compatibility with the required control supply voltage range of 13.5 V to 18 V. Confirm that the application design accounts for the 1500 Vrms isolation rating between pins/heatsink and the operating junction temperature limits up to 150 °C. Cross-reference the latest datasheet revision for any updates to thermal resistance or absolute maximum ratings.

Selection Notes

Select this component for compact AC motor drive designs requiring integrated gate driving and protection logic. It is suitable for applications where assembly space is limited but thermal performance remains critical. The inclusion of an operational amplifier allows for flexible current sensing configurations without external components. Consider the 1.0 Ω maximum on-resistance when calculating conduction losses at the target load current.

Part Context

This part belongs to the SLLIMM nano 2nd series family from STMicroelectronics. These modules are designed as small, low-loss intelligent molded modules targeting home appliances and industrial motor control. The series combines optimized silicon chips with integrated control ICs to provide a rugged, high-performance solution for built-in motor applications.

Replacement Considerations

STIPQ5M60T-HZ is a verified substitute within the same product line, sharing identical electrical specifications and functionality. The primary difference lies in the packaging variant; STIPQ5M60T-HZ uses the N2DIP-26L type Z package. Verify mechanical footprint compatibility before substitution.

FAQ

How does the smart shutdown function operate?

The smart shutdown function immediately turns off the output gate driver upon comparator triggering via a preferential path. This reduces disable time dependency on external RC networks, while the open-drain output holds the state until the shutdown voltage drops below the logic threshold.

What is the purpose of the T/SD/OD pin?

The T/SD/OD pin serves multiple functions: it connects to the internal NTC thermistor for temperature monitoring, acts as an active-low shutdown logic input, and provides an open-drain output for the comparator signal.

Can the device be driven directly by an MCU?

Yes, direct coupling to MCU terminals is possible without optocouplers due to the integrated HVIC. However, input signals should use short wiring and RC filters to prevent oscillations, and pull-up resistors must be selected based on the MCU supply voltage (1 kΩ for 3.3 V or 2.2 kΩ for 5 V).