STSPIN32G0602Q

Overview

The STSPIN32G0602 is a system-in-package integrating an STM32G031x8 MCU and a 600 V triple half-bridge gate driver. The MCU features an Arm Cortex-M0+ core operating up to 64 MHz, 64 KB flash, and 8 KB SRAM with hardware parity check. The gate driver supports N-channel MOSFETs or IGBTs with source/sink currents of 1.0 A/0.85 A at 25 °C. It includes integrated bootstrap diodes, UVLO, interlocking, deadtime, and SmartSD overcurrent protection. The device operates within an extended temperature range of -40 °C to +125 °C.

Feature Summary

• Integrated 600 V triple half-bridge gate driver with ±50 V/ns dV/dt immunity
• STM32G031 MCU with Cortex-M0+ core, 64 MHz clock, 64 KB Flash, and 8 KB SRAM
• SmartSD comparator for fast overcurrent protection with programmable disable time
• QFN 10x10 72L package with exposed pad connected to SGND

Applications

• Three-phase motor drivers
• Inverters
• Industrial appliances and fans

Procurement Notes

Verify the specific ordering suffix against the manufacturer's official documentation to confirm exact pinout, thermal characteristics, and functional variants. Ensure the selected part number matches the required voltage ratings and memory configuration for the target application design.

Selection Notes

Select this component for high-voltage three-phase BLDC applications requiring integrated control and power stages. The 600 V rating suits industrial motors, while the embedded MCU simplifies firmware development for FOC or six-step control modes. Check GPIO availability against interface requirements such as SPI, I2C, and UART.

Part Context

This device belongs to the STSPIN32G0 family of highly integrated motor controllers. It combines the computational power of the STM32G0 series with robust power stage capabilities, reducing bill of materials and board space compared to discrete solutions.

Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. Verify compatibility with existing designs by comparing electrical parameters, pinouts, and thermal performance before substitution.