SX1M24.576M10F30TNN

Oscillators Overview

The SX1M24.576M10F30TNN is a standard CMOS active crystal oscillator manufactured by Shenzhen SCTF Electronics. It operates at a fixed frequency of 24.576 MHz and supports a supply voltage range of 1.62V to 3.63V. The device features an enable/disable control function, where a high level or floating pin outputs the frequency, while a low level disables output. It offers a frequency stability of ±10ppm over temperature and ±30ppm overall, with a typical current consumption of 10mA. The component is housed in an SMD2016-4P package.

Oscillators Feature Summary

• CMOS output interface compatible with standard digital logic
• Voltage enable/disable functionality for power management
• Compact surface-mount design suitable for space-constrained applications

Oscillators Applications

• Digital signal processing circuits requiring precise clock sources
• Communication equipment utilizing standard frequency references
• Embedded systems needing low-power clock generation

Oscillators Procurement Notes

Verify the specific ordering suffix and package variant against the official datasheet before purchase. Confirm that the supply voltage requirements align with the target circuit's rail voltages. Ensure the enable pin configuration matches the system's power sequencing strategy. Check for any specific temperature range limitations defined in the manufacturer's specification sheet.

Oscillators Selection Notes

Select this component when a 24.576 MHz reference is required with tight initial accuracy. Consider the 1.62V minimum operating voltage for low-power designs. Evaluate the ±10ppm stability requirement against system jitter tolerance. Verify the SMD2016 footprint compatibility during PCB layout phase.

Oscillators Part Context

This oscillator belongs to the SX1M series from SCTF, designed for general-purpose timing applications. The model number indicates the frequency (24.576M), stability (10ppm), and total tolerance (30ppm). It serves as a primary clock source for microcontrollers and memory devices.

Oscillators Replacement Considerations

Direct substitutes must match the 24.576 MHz frequency, CMOS output type, and SMD2016-4P package. Verify equivalent voltage ranges and enable pin logic polarity. Cross-reference stability specifications to ensure no degradation in timing performance.