SX2M33.300B10F20TNN

Oscillators Overview

The SX2M33.300B10F20TNN is a surface-mount crystal oscillator manufactured by Shenzhen SCTF Electronics. It operates at a nominal frequency of 33.3 MHz and utilizes CMOS output logic. The device is housed in a compact SMD2520-4 package, suitable for space-constrained designs. It supports a supply voltage range of 1.8V to 3.3V and features an enable/disable control pin for power management. The component is designed to provide stable clock signals for digital systems requiring precise timing references.

Oscillators Feature Summary

• Integrated enable/disable functionality for active power management
• CMOS output compatibility with standard digital logic families
• Compact SMD2520 footprint for high-density PCB layouts

Oscillators Applications

• Embedded system clock generation
• IoT device timing references
• Portable electronic equipment

Oscillators Procurement Notes

Verify the specific ordering suffix against the manufacturer's current datasheet to ensure correct frequency tolerance and load capacitance specifications. Confirm that the SMD2520 package dimensions align with your board design constraints. Request official test reports for phase noise and stability if required for critical timing applications.

Oscillators Selection Notes

Select this model when a low-profile 33.3 MHz clock source is needed with voltage flexibility between 1.8V and 3.3V. Ensure the application requires CMOS output levels rather than LVDS or HCSL. Consider the thermal characteristics of the SMD2520 package for heat dissipation requirements in enclosed environments.

Oscillators Part Context

This oscillator belongs to the SX2 series from Shenzhen SCTF Electronics, focusing on small form-factor timing solutions. The series targets modern consumer electronics and industrial controls where size and power efficiency are prioritized over ultra-high precision. It complements larger through-hole or larger SMD oscillators in mixed-signal designs.

Oscillators Replacement Considerations

Direct substitutes must match the 33.3 MHz frequency, SMD2520-4 package, and CMOS output type. Verify equivalent electrical parameters such as supply voltage range and enable pin logic before substitution.