SXOB14.7456B20F30TNN

Oscillators Overview

The SXOB14.7456B20F30TNN is a standard crystal oscillator (XO) manufactured by Shenzhen SCTF Electronics. It operates at a frequency of 14.7456 MHz with CMOS output logic. The device requires a 3.3V supply voltage and supports an operating temperature range from -40°C to 85°C. Frequency stability is specified at ±50ppm, and the maximum supply current is 25mA. The component utilizes an 8-DIP package configuration, specifically featuring a half-size metal can housing with four pins in a through-hole mounting style.

Oscillators Feature Summary

• CMOS output signal generation for digital circuit interfacing
• Through-hole metal can packaging for mechanical robustness
• Enable/Stop functionality for power management control

Oscillators Applications

• Industrial control systems requiring stable clock signals
• Communication equipment baseband processing
• Embedded data acquisition modules

Oscillators Procurement Notes

Verify the specific manufacturer part number against official distributor catalogs to ensure authenticity. Confirm that the 8-DIP half-size metal can package matches the target PCB footprint requirements. Check that the 3.3V supply specification aligns with the system voltage rails. Ensure the ±50ppm frequency stability meets the timing tolerance requirements of the application environment.

Oscillators Selection Notes

Select this component when a through-hole mounted oscillator with a metal shielded case is required for EMI reduction. The CMOS output level is suitable for direct connection to standard logic families. Consider the thermal range of -40°C to 85°C for industrial or commercial environments. The enable/disable pin allows for active low power consumption states when the clock is not needed.

Oscillators Part Context

This oscillator belongs to the series of surface mount and through-hole crystal oscillators designed for general-purpose clocking applications. The 14.7456 MHz frequency is commonly used in serial communication interfaces such as UART and SPI where baud rate compatibility is necessary. The metal can package provides superior shielding compared to plastic packages, reducing electromagnetic interference susceptibility.

Oscillators Replacement Considerations

Direct replacements must match the 14.7456 MHz frequency, 3.3V supply, CMOS output, and 8-DIP half-size metal can package. Verify that substitute components offer equal or better frequency stability and operate within the same temperature range. Pinout compatibility for the enable function must be confirmed before substitution.